1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

TRD OR Stock Take-offs, Icon U-Bolts, and More

Discussion in '3rd Gen Tacoma Parts Marketplace (2016-2023)' started by CAG Gonzo, Nov 11, 2022.

  1. Nov 11, 2022 at 3:10 PM
    #1
    CAG Gonzo

    CAG Gonzo [OP] Ascendant Spaghetti

    Joined:
    Oct 25, 2018
    Member:
    #270558
    Messages:
    1,688
    Gender:
    Male
    Vehicle:
    2018 OR DCLB BarRed
    Got a bunch of stuff taking up space in my garage. Help me reclaim the lost territory! I'm more interested in getting space back than making a fortune. My wallet and I are already no longer on speaking terms and I've made peace with that. For now. I am open to offers within reason.

    Most of this stuff is big, heavy, or both. Shipping would not be ideal but I'm open to suggestions if you really want an item(s). Otherwise, I am in Las Vegas, NV. Happy to deliver the item(s) to your place (or another predetermined meetup spot) and assist with loading or installation. All I ask is a 6-pack or equivalent of your favorite beverage.

    All these items either came off of my 2018 DCLB TRD OR because I replaced them with something aftermarket, or were extra parts I did not need. Everything except the Icon U-bolts is used and shows commensurate wear but it's just cosmetic; there is no damage to functionality or purpose.


    4 x TRD OR Wheels & 265/70R16 tires - $65020221111_135552.jpg
    20221111_135545.jpg
    20221111_135222.jpg
    20221111_135249.jpg
    20221111_135339.jpg
    20221111_135352.jpg

    I replaced the Toyota emblems on the wheel caps with some custom vinyl from a member on here. My truck is red and I love Halo, so I thought it was a good look. I still have the emblems if you want them (free). They just snap back in to the caps. The snowflakes on the wheels are blacked out with vinyl from the same member. Some of the vinyl is chipping away but it's not super noticeable. I have at least a dozen replacement vinyl covers if you want them (free).

    Discount Tire installed my new wheels and tires and I'm pretty sure they installed the stock TPMS units in my new wheels but they put the stock valve stems and valve caps back. I measured tread depth from a bridge point in the same tread row on all 4 tires. I have no idea why the 4th (bottom-most) tire is so much deeper than the other 3. Toyota rotated them per scheduled maintenance intervals, and I rotated them myself at least once. Rotation flow was per the manual. All that said, I've never had issues with these. Just wanted to disclose all that up front.

    Removed these at precisely 31658 miles.


    Stock and locking lug nuts - $10 or free with any other purchase
    20221111_135538.jpg

    Stock lug nuts and locking nuts. 20 stock nuts, 4 locking, 1 key socket. I also have the other 4 stock nuts if you want those instead of/in addition to the locking nuts. Also removed at precisely 31658 miles.

    Can ship via USPS in a flat-rate box or envelope which should only be a few bucks.


    Stock Fuel Tank Skid - $22
    20221111_135422.jpg 20221111_135434.jpg

    Stock skid plate. It's a durable, thicc plasticc. I think this is only immediately compatible with TRD OR and Pro trims. All others may need to get the fuel tank straps. Not 100% sure on that. DOES NOT INCLUDE MOUNTING HARDWARE. I had to reuse the stock mounting hardware to mount my steel skid. Removed around 37000 miles.


    Stock Front IFS skid plates - $30
    20221111_135441.jpg 20221111_135451.jpg 20221111_135459.jpg 20221111_135506.jpg 20221111_135510.jpg

    Stock front IFS skids with mounting arms. Scratches and dents from off-roading, and a small patch of rust on the underside of the front skid, near the forward driver side hole. You can probably see it in the second picture above. DOES NOT INCLUDE MOUNTING HARDWARE. I had to reuse most of the stock mounting hardware to mount my steel skids. Removed around 37000 miles.


    Icon RXT U-Bolts - $10 or free with any other purchase
    20221111_135519.jpg

    U-bolts from Icon RXT packs. I installed a U-bolt flip kit when I installed the leaf packs so never touched these. Can ship via USPS in a flat-rate box or envelope which should only be a few bucks.


    Stock TRD OR Suspension - $200
    &
    Kings 14" 600lb springs - $30
    &
    Fox 13" 600lb springs - $30
    20221111_135526.jpg 20221111_135533.jpg 20221111_135516.jpg
    20221111_135707.jpg

    Complete TRD OR stock suspension, sans most hardware (bolts n such) which I reused when I installed my aftermarket stuff. I have a few take-off bolts pictured in the bag in the last picture. There's two new bolts in there. Not sure where those came from but I believe those are for shackles. Speaking of, the stock shackles are included but the bushings are older. When I installed my suspension, I just got new ones (they're ~$22 for both) and pressed in some bushings that came with my hammer hangars from Archive.

    Both leaf packs, front and rear shocks, u-bolt plates, and rear bump stops included. Removed all of this stuff around 28100 miles.

    The Kings coils were never used by me and I bought them used off a member here. I believe they have around 10000 miles on them. I ended up getting some black Bilstein springs instead because I'm vain like that. Said springs replaced the Fox stock 13" springs, which have about 3000 miles on them.

    This should be everything you need to install this suspension on your truck, since you'll be reusing your hardware. Installation will take some time depending on your abilities, familiarity with suspension, and access to cool things like frame lifts. However, I was able to install my new suspension in my garage with a simple jack and jack stands and plenty of cussing elbow grease. My offer to assist with installation stands and I have all the tools necessary.

    Stock Front License Plate Holder - $10 or free with any other purchase
    20221111_135601.jpg

    I had this on my truck for around 7000 miles. I don't have any mounting hardware but you only need two self-tapping screws to mount it and another two smaller (non self-tapping) to secure your plate. There's two tiny bumps on the front bumper that indicate where the screws go.


    DCLB 5" Black Oval Tube Steps - $75
    20221111_135630.jpg
    This was the second mod I did to my truck. These are OEM. I loved these. Not only were they super useful but they looked great, too. I'm kinda sad to see them go but I have sliders now. I cleaned these up but they were left exposed when I moved and the packers banged em up so there's more cosmetic scraps and dings which makes me sad. That said, these will still serve you well and I have all the mounting hardware you need.

    These will NOT fit DCSB or ACLB models. I do not know if they are compatible with previous gens though I don't see why they couldn't fit a 2nd gen DCLB.



    And I think that's it. I have some other items for sale here: https://www.tacomaworld.com/threads/wts-garage-sale.606812/. Please reach out if you have any questions or concerns, would like to see more pictures or know more about the items I am selling, or to join me as I regain lost ground in my garage!
     
  2. Nov 11, 2022 at 3:15 PM
    #2
    LarryDangerfield

    LarryDangerfield One Larry a day keeps the money away ™ Moderator

    Joined:
    Apr 16, 2017
    Member:
    #216434
    Messages:
    8,587
    Gender:
    Male
    First Name:
    Tyler
    Northern Wisconsin
    Vehicle:
    Black 2020 Nightshade Edition 4Runner
    Oh there will be some mods all right
    I'll take the stock lug nuts and icon u bolts please
     

Products Discussed in

To Top