TRD Pro & TX Baja OFFICIAL Thread...

I have a set of front and rear trd pro. When I took it off it has less than 5000 miles and never been offroad (only NY pot hole)

 

Definitely haven't abused them, mostly a commuter vehicle. But, only "abuse" is that it has seen is sitting on the freeways in this damn socal traffic haha.

If @dark vader trd pro is ready to sell, I would go with his. Definitely lower mileage. It would probably be awhile for my set as I would probably be waiting until a group buy or sale comes along.

 

Cool, I'm not ready to buy just yet. It would be a back up set anyway for my current setup. I'm only wanting for rears.......

 

I am ready already replaced the front with fox and rear with icon if u want PM me

 

I bought a TRD Pro suspension and finally installed them on my 2013 TRD Sport. Well, except the rear shocks, the shock bottom was wider than the shock mount on the truck and the shock apparently take a bigger bolt than what is on the truck. I had some sleeves made to accommodate for the bolt size difference. I'm also told to just bend out the mount on the truck to get the shock bottom to fit but I'm thinking I may just grind off about an 1/8th inch of the shock bushing on each side should let it fit. Anyone see a problem doing this?

Also, I got zero lift on the front with the Pro coilover! I had 1" spacers on and removed those coilovers and installed the Pro coilovers and went from 22" down to 20.5" on front. IDK why I lost so much height, I was told these PRO coilovers would give me 1 3/4" lift. Now I'm thinking of putting those old spacers on top of the PRO coilovers.

 

This is back when I took it off

 

This is what I have now

 

Those brakes look awesome!! Do you have a long travel set up now?? Do you have a pic of the rear Bajas??

 

You definitely should have 1&3/4 over stock.....I know of someone that put 1/2 spacers on top of the Baja shocks and it apparently works just fine. If you do that you will have to replace the 3 bolts on top to accommodate that spacer

 

no not long travel just mid travel and i dun think I have picture of the rear

 

I have that. It definitely works.

 

Yup, you were my reference......to clarify though. You did a 1/2" correct?? He has 1" spacers. .....do you think those would work???

 

Not really sure, something sounds screwy with the whole setup. Pics would help.

 

I actually meant a picture of the 1" spacer you planned on using. Also, why is your upper shock mount so high above the coil bucket? Something looks off about that.

 

Here's mine for reference.

 

What size tires came with the TRD Pro and or Baja in 2015? What was the gear ratio of the 2015 Pro?

Forgive me for not reading all the first 72 pages that I have read so far again to find this out. The search function on this site gets a C- grade from me also.

Am looking in to doing the same suspension lift as the 2015 Pro but was curious what Toyota decided on for the 2015 as far as tires and gear ratio.

Thanks, hope you all have a great Memorial Day... Cheers!

 

3.73 gears, and 265/70/16 BFG KOs.

 

Do you have spacers? My spring sits more up inside the bucket than yours also, like you have something more on top of the spring.

 

Here's my spacers