1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

TRD Sport "tow hook"

Discussion in '2nd Gen. Tacomas' started by pojo82, Jul 11, 2011.

  1. Jul 11, 2011 at 6:20 AM
    #1
    pojo82

    pojo82 [OP] Well-Known Member

    Joined:
    Oct 29, 2009
    Member:
    #25105
    Messages:
    82
    Gender:
    Male
    First Name:
    Josh
    NE Wisconsin
    Vehicle:
    06 TRD double cab
    flowmaster exhaust, URD cold air intake, URD MAF calibrator, Thorley Headers Billy 5100s set to 2.5 lift in front, Billy shocks with add a leaf in the rear Wet Okole seat covers
    i replaced the factory "tow hook" on the passenger side of my TRD sport with a beefier one that i put a D ring shackle on. my question is are the bolts holding the stock one on strong enough. i know you can tell the grade of a bolt by the markings on the head but i cannot find what the marking on these mean. what does one dash mean? this is what is on these bolts.
     
  2. Jul 11, 2011 at 9:11 PM
    #2
    Bodete

    Bodete Well-Known Member

    Joined:
    Jun 3, 2009
    Member:
    #18009
    Messages:
    79
    Gender:
    Male
    Missouri
    Vehicle:
    2009 SR5 DC LB 4x4
    Eibach springs w/ 5100 Bilstein shocks set to "0", Rear TSB
To Top