Ultra Guage MX V1.3 trans. temp (2012+)

Per the instructions, I know, who needs those or why can't it all be pictures, I don't like to read. Can't find the trans. temp reading or it's way off/ERR? When you get your UG, you have to do a "factory test" to bring up the programmed 8 parameters. Setup your vehicle in the UG. At this point, if you are already lost in how to use the UG, you probably don't need to be plugging stuff into the OBDII port and pushing ANY kind of buttons and shouldn't have bought it.
Here's what you need to do for trans. temp:
Menu ->Guage/Page menu...->Select Guage/Page -> M Guage Setup
you scroll to the trans. temp degree F and select these values and change;
TDATA: 07E02182(and a bunch of zeros)
MTCH:6182
RPOS: 2808
RCTRL:21
TCTRL:92
X:0001 /:0001 +:FFD8
Output Format:00
Left/Right is 31

 

Are the values we need to enter?

 

your changing to the ones listed

 

Ok, thanks but I'm also wondering how did you figure out what values to put in? This looks really technical.

 

In the instructions that came with it. they are poorly written and very unclear of you have no experience doing this kind of thing

 

Ok, thanks. I haven't gotten mine yet so I haven't read it.

 

Upgraded mine last year and if it wasn't for TW.....I'd still be pushing buttons. The cracker jack instructions are of little help

 

Sub'd

 

I loaded these values for a 2016....no dice....still shows "err"