uncle poops little *itch build

2009 2tr-fe manual trans as she sits today

LR uca's (no bending of inner fender required if you cut out the bolt and put them in backwards)
ome 883 springs(too stiff in my opinion) with ome shocks

LCEngineering header(torque the bolts under the tubes requires a double jointed leprechaun)

air/oil seperater(home made bracket)


diff breather relocated


SD Truck Springs 90-297 hd (advertised as stock replacement)
17x7.5 4.8ish" BS FJ wheels
255/75 Load C firestone destination M/T(would have run 255/80r17 but maine tire laws don't permit for this truck..........POOP!)

tire tread covered by fenders, still legal, good alignment and no rubbing
hub to fender measurement RF 22 1/4" LF 22 1/8
RR 24 1/4 LR 241/4
also-
competition clutch stage 3 (from urd)
short shift kit(also from urd-good stuff)

Gibson ultra flow 2 1/4" in 2 1/2" out dumped in front of axle(because getting my spare to fit was fun, and was touching the tailpipe hanger)

two gun rack that only holds one because it got shortened to fit in the window

removed secondary air filter, afe dryflow drop in

afe cone filter valve cover breather, plugged intake tube line

That's about it thanks for stopping by, if you have any question or comments let me know, computers aren't exactly my thing so if this page is all messed up i'll try to fix it

 

Looking good!

 

thanks, more to come in the future