URD 2.85 pulley for sale

This is for the trd blower. Just removed. A little paint on the back side missing where puller arms were, but still straight and able to be used. $75 + shipping. I'll throw in the pulley install tool from URD for $30 if purchased before it sells with the snout cutter.
If I still lived in Phx at 1500' elevation this would be fine as it made about 6.5+ lbs of boost when it was warm there. A little more on a cool day (7lbs). Up here at 6600' elevation it drops to 5-6lbs depending on air temperature.

 

Add 15-20 hp to your magnuson or TRD supercharger with this pulley. No other tuning or fueling items needed. Grab a 5 ton puller at autozone for free loan, spray some pub blaster on the sc shaft, let sit overnight your old pulley should come right off.
Put a little anti seize on the sc shaft, boil this pulley for 10 minutes and the pulley install tool will push it right on. Use your same sc belt and go!