Valve covers, door handles, steering wheel, interior parts

Hey TW,

Got some stuff laying around my house and time for it to go.
Buyer pays shipping.

4.0 valve covers: pulled from my engine when i swapped to my powder coated ones. - $75

Unpainted outside door handles from my access cab. - sold

complete steering wheel with air bag: pulled from my truck when I swapped steering wheels. - $150

Overhead consoles: the tan one is sold.
The grey one is set up for the switch mod or whatever custom idea you have.
- $20 each

center dash piece: this one has been hydro dipped to looked like carbon fiber. - $160

tacoma passenger window switch:
For the 2010 and newer wiring style. - $10

4runner auto window switch:
Can be used to convert tacoma passenger window switches to auto switches. - sold

 

Interested in the tan overhead console, never tried removing one before, is it complicated or pretty straight forward?

 

As in taking off the roof “removing”? If so ya, it’s one screw, pull down on opposite side and disconnect the wiring for the lights.

 

Right on, how much for shipping to concord ca 94519?

 

You got my message. Thanks.
Happy thanksgiving!

 

USPS priority is estimated at $15

 

Replied

 

Sending a pm

 

That’s a good deal on the steering wheel, May I ask what year wheel you installed and a picture would be nice to see.

Also the carbon looks good what did you replace it with if you don’t mind sharing?

 

I went with a 2012 style.
This is a spare one I have. Same thing still in my truck.

 

Thank You!
Oh, Damn I didn’t notice the carbon on the wheel and the red stitching! Looks really good!
I was thinking about the same but the AirBag is outrageous!!
I wouldn’t need any switches on the wheel.
Plus my LS Swap is getting close to being completed…

 

Ya the airbags can be a pretty penny, have to keep an eye out for a good deal.

An LS swap is intense.

 

May I ask who recovered the wheel with red stripes and stitching?

 

I did.

 

Hmmm…
Buying a 12 plus wheel & airbag is going to set the buyer back $500 plus!!
Do you cut and sew the leather or just install a cover from RedLine or someone else? I might be interested in hiring your skills?
I like to update the dash with the white/light blue dash lights over the red/orange lights and change the wheel.
Should look better with the Toyota 86 seats
Thanks in advance!

 

Ya by the time you get all the pieces including a leather cover it’s a good $500 or more.
Mine is a RedLine and by their standards is considered custom, that I stitched on.
I am a pretty conservative about my skill set and recognize that I am not a professional. There is no part of me that thinks I would let someone hire me to do something I am just a hobbyist at.

Your seats look nice, what model Toyota did they come out of?

 

Hey, the package was received today. Thank you.
I thought you said "USPS ground is estimated at $10. That is the cheapest I know of." I guess $7.75 was the shipping fees when shipped.
They say: trust but verify! I guess I didn't verify enuff.

 

That’s pretty rude dude. If you got something to say to me, send me a PM.
I don’t take kindly to someone who wants get be a keyboard warrior and try to slander me on open forum.
As I messaged you, it’s a shipping estimate and I estimated the shipping weight.
It’s not like I have a certified scale at my house.

 

Well, if there was a PM to make me aware of the actual shipping cost became lower than your quote; with some decency, probably it would be an "oh well" kind of reaction from me, since the change I donated to Paypal on each payment I made is much more than that.

 

Hence the word "ESTIMATE" :roughly calculated; approximate. There's your clue, since you didn't pay attention in school. It was your chose to use friends /family or paying for goods but I am noting paying for the service. Put it in your tail pipe and go back to your moms basement.