Vibration when I press the gas petal

when I'm at a stop light and I press the gas petal my Tacoma vibrates , anyone has any idea what's going

 

Have you recently installed a lift? I.e. new leafs under the rear or an AAL kit?

 

It's a 2007 Tacoma , I didn't do anything to the truck everything original

 

Can't tell if it's shaking without moving or not by the OP.

 

@Matros08 do you get the vibration once you start moving?

 

Doesn't shake when stopped, only when I press the gas petal, maybe for about 5 seconds or so

 

Yes when I start moving

 

Check carrier bearing. As @Rock Lobster said probably drive line vibrations.

 

Thanks guys , I'll check it out

 

You're welcome and welcome to TW Amando!

 

Just joined yesterday myself and asked the same question under 'technical chat' but no response..should have came here first. Same truck as Amando, 2007 Tacoma TRD with 200,000 km and has what feels like a driveline shudder when I begin to accelerate and lasts about 5 seconds. This makes total sense Mike because I had an error msg that said my cam wasn't lining up with my crank shaft properly. If this solves the problem then big kudos goes out to you!!

 

Im having the same problem with mine accelerating from a stopped position. It also vibrates in the 70-75 mph range. Just curious if bkth problems were solved as i could see if its the same problem with mine. Thanks