Volk racing TE 37 on my tacoma

Yeah, adapters are required to run them sadly... Kinda digging them though.

 

More info on the spacers? I’m digging the center caps

 

I ended up running 1.25 spidertrax. Worked like a charm.

 

Thanks for sharing. I was wondering if you ended up installing the new caps. Did you only installed the spacers in the front?

 

Ended up installing them on all corners.

 

-20 with 1.25” spacers. Holy poke.

If my maths are correct you’re at -52 offset

How’s the rub?

 

Not to bad actually... Slight rub on the front fender lining at full lock going over bumps. Pretty sure a small heat treatment will resolve the issue.

Edit: poke ref.

To your point though, the poke is for real. We'll see if I adjust to the look or not in a few weeks.

 

Too much meat/lowrider flush?

 

Looks good to me

 

After hoarding these for over 3 years I finally got them mounted and can post a pic like all the other cool kids. Will be raising the front a little more and have some trimming to do on the liner.

16x8 -20 on 295/75s.

 

Whoa, nice Goldie Hawns!

 

Dayummmmm, did you have to do a lot of modifications to fit 295?

 

When I heard they were discounting the X I had to pull the trigger.

So far I have done a CMC, pinch welds bent, and have some trimming I need to do on the front of each fender liner.

 

Oh man...this is too good.

 

Capless is the only way to run the OG TE’s. Looks good!

 

I nutted all over your TE37 pr0n pics.

 

Do you remember which outer flange you selected when ordering these hub rings?

 

112mm

 

I know it's 112mm - 106.1mm but when ordering they ask you to select between 3 different outer flange options. Standard, half, or no outer flange.

 

Interesting, im not familiar with flange options, but this is what I ordered and using: https://www.vividracing.com/mackin-4pc-106mm112mm-hub-ring-p-152877422.html