Warn Zeon Wiring of In-Cab winch to CH4x4 - Winch (Power) & (In/Out) Switches

Hi Everyone!

This is my first Post and just signed up for TW! Hoping to get some help with my wiring issues. I have never wired before and this parts seems pretty critical.

I have watched a lot of video's on both how to use these switches and also how to wire up in-cab switches to my dash. I will be using the coin holder slot to use a CH4x4 ON/OFF switch w/ lighting and a winch IN/OUT momentary switch next to it in the dash using a Caliraised panel to hold the switches.

I am going to run 18 AWG, 4-core cable from the control pack through the firewall and to the switches. i just don't want to burn anything out wiring it up the wrong way.

On the CH4x4 packages it says you "MUST" use a relay - but none of the videos i watch use a relay for winch wiring - i think the solenoid is somewhat of a relay itself lowering voltage for smaller wires?

Anyway - i was hoping that some of you might help guide me on how to wire the cable to the control pack, and then back out to the switches to get this thing working.

the on/off switch has (4) wires, and the in/out switch has (5) I believe.

thanks a bunch and i appreciate any assistance!