WaterPort Costco

I ordered a pump cap a long time ago. Any idea when these are going to finally start shipping?

 

Alas... Tried 2 different tee adapters, and both are too big... The tee joint sticks out too much and won't allow me to screw it on. Just ordered the original one you posted for Amazon to see it that will work.

 

Dam sold out

 

Check sportman warehouse they had restock last week

 

Copied @tacopromatt idea of adding a pressure gauge.

 

Got the pump cap yesterday and just put it on. Took less than a minute of pumping to get from 0 to 30PSI. After 20PSI it starts to get harder and harder to pump. Definitely a convenient option to have if you're filling up on-the-go or just need a little bit of pressure to get that last half-gallon out.

 

Anybody actually tried using a bicycle pump? How does that work?

 

Works great.

 

Super. THat means the pump cap isn't really necessary.

I'll install my pressure gauge next week!

 

I actually posted a while ago about it. Look at the bottom of this page under products discussed. I use a very small bike pump with gauge built in. It works wonderfully.

 

For those of you who put the pressure gauge on...what are you seeing when you fill your tank via a hose? Mine stops around 50 psi...seems off.

 

The pressure relief valve is a 50 psi relief valve

 

Sorry... not much of an engineer
I seem to remember that the instructions said not to go over 20-30 PSI, so i'm confused by this reading.

 

I tried that and it works like a champ!

 

That's Brilliant! Thanks for sharing!

 

Anyone has a way to make the water hot? I tried to put that under the sun but the water still not as warm. Was thinking to boil the water and pour it in the Waterport, but is there anyone has another way to do that?

 

What is this? Where do you buy this for use with tonneau covers?

 

It’s the drop down plate for the waterport. In the Tacoma’s it comes very handy if you have a tonneau cover. However, if you have a bakflip from bakindustries then you need to make additional holes for it.

 

Waterports website buddy

 

Been using the water port for about a month, the shutoff valve starting to leak and no way to stop it. So stopped by Home Depot this afternoon and replaced with a better quality brass made shut off valve. Works great

(Update 4/2/2019)
Here's the one I replaced with the original one came from Waterport. I purchased it from Home Depot.

https://www.homedepot.com/p/Orbit-3-4-in-Threaded-Brass-Shut-Off-Coupling-27933/100659291