1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Weekend Project - AllPro Sliders

Discussion in '2nd Gen. Tacomas (2005-2015)' started by RZRob, Dec 10, 2010.

  1. Dec 10, 2010 at 8:41 PM
    #1
    RZRob

    RZRob [OP] Well-Known Member

    Joined:
    Dec 9, 2009
    Member:
    #27315
    Messages:
    509
    Gender:
    Male
    First Name:
    Robert
    Anaheim Hills
    Just picked up my AllPro Sliders today. I am really impressed by the design & workmanship. I pity the rock that meets up with these.

    Looks like I've got something to do this weekend. :yay:

    RZ Rob

    [​IMG]

    [​IMG]
     
  2. Dec 10, 2010 at 8:46 PM
    #2
    Hoyal

    Hoyal Whiskey bent and hell bound.

    Joined:
    May 14, 2009
    Member:
    #17221
    Messages:
    18,114
    Gender:
    Male
    First Name:
    Devin
    N 39.2249 W -106.16974
    Vehicle:
    2000 4runner
    OME 3 inch suspension lift Toytec 1in body lift Rodger brown diff drop ARB front bumper Big tires, but want bigger! :) Xrc 8000 winch Hella3000 lights Deck plate mod Diff breather relocate Cb radio 1st gen roll bar Addicted sliders Spider trax wheel spacers.
    Very nice. I'm waiting for my demello sliders in the mail.
     
  3. Dec 10, 2010 at 8:50 PM
    #3
    blackhawke88

    blackhawke88 wo ai ni bao bei ^_^

    Joined:
    Jan 11, 2009
    Member:
    #12478
    Messages:
    16,670
    Gender:
    Male
    SGV, CA
    Vehicle:
    07 TRD Offroad
  4. Dec 12, 2010 at 9:03 AM
    #4
    RZRob

    RZRob [OP] Well-Known Member

    Joined:
    Dec 9, 2009
    Member:
    #27315
    Messages:
    509
    Gender:
    Male
    First Name:
    Robert
    Anaheim Hills
    So I got under the truck yesterday and fitted the sliders. It was pretty easy (except for the fact that they weigh a freckin ton). Now, contrary to popular opinion, I'm going to take them back off and powder coat them.

    Here's a couple pictures of WIP.

    [​IMG]
    Used the jack & jackstands to position them, then put one screw in as a placeholder while I drilled the holes. Note the countersunk holes for the bottom.

    [​IMG]Here was my way of drilling the holes along the bottom. Controlled the pressure via my leg. Sort of a upside down drill press.

    [​IMG]
    Project required an angle drill too (Harbor Freight). Had cold Pacifico's waiting for afterwards.

    Finished mounting both sides, but took them off before pictures. Will paint and post pictures by next weekend hopefully.

    RZ Rob
     
To Top