What Have You Done To Your 3rd Gen Today?

Installed OEM TRD Pro headlights on my sr5 with a custom wire harness from @Puppypunter man these look MEAN! Also a bit of off roading this weekend!

 

Ahhhhh, what's in the boooxxx?!

 

I mounted a pelican once. That's why I'm not allowed back in the zoo...

 

There are no bottom hooks, just wraps around the bed cleats.

 

the top only attach and the bottom are free floating

 

Looks good. Time to upgrade to led, sliders and probably some seat jackers in that 3rd gen

 

AND……

 

i got super lucky. A member here was selling these a few weeks ago since he sold his truck. The smoothies are brand new.

 

Here's what I did today! Swapped back to the SR5 Grille, got sick of seeing the pro grille everywhere. Also here's a photo dump of all the other mods I've done over the months haha

 

It’s a much needed improvement for the 3.5L. Makes it a normal truck to drive and haul cargo. Only downside is… Compared with the OV tune 2.0, the Magnuson tune loses some of the torque bump sub 3500 rpm. Still more throttle response than stock and the power up top is significantly better.

 

Did some goofing off with some video editing software. Crammed 30 shots in about 9 seconds.

 

Same here with my 2020.

 

Just do a search on "Bakflip"

 

Installed CaliRaised ditch lights, Redline hood struts and CaliRaised blacked out sequential mirror turn signals.

 

Matches mine almost identically! Right down to the spot, curve, and current stop point of crack. lol

 

After six years, did the A/C mod. No rust on the frame (due to "Fluid Film"), but more of a preventative measure.

 

My 1st truck MOD! Before and after WeatherTech window deflectors. I've never had a window drip when wet so bad. Do the Toyota engineers not drive these things after a morning dew? Why are they not factory installed?

 

How hard were these to install? I've heard stories that some of them cause the window to not roll up all the way.

 

Much easier than I thought it would be. The back windows have a little clip to insert, they include the tool "required." The front windows just slide right in.

The back windows and driver's window closed right up no problem. Passenger front had a bit of issue. Adjusted a bit and it kinda worked. Instructions are VERY SPECIFIC about leaving windows closed for 24-48 hours after install. This allows the rubber to reform to the plastic. Makes sense. If there is an issue after 48 hours, ya'll will be hearing about it for sure!