What Have You Done To Your 3rd Gen Today?

Ouch good luck.

 

10-22 or mini 14, can't tell.
Dope Solar Orange btw

 

10-22

 

.22 is fun, I remember when It got wildly expensive a decade ago when I was fresh out of HS.

 

Wasn’t half bad.
This time

 

I washed the Barca red 2021 Sport Taco today.

I think this might be the forth time I have washed it from new. Living a mile off pavement gets a guy to say "why". Two inches of rain to night, If I go out, it's gonna get muddy/////again!

 

I put four years at a work place with a same parking lot. When I traded in that truck ( a lease) I offered to vacuum. No the sales lady insisted they take care of it, after all it was Red Carpet lease. Boy did I get an earful when I showed up to actually buy a truck there. lol.

 

VLEDS Vtails install. I'm not satisfied.

Brakes use park light.

Turn signal is hyper. Turn signal is normal when shifter in REVERSE.

Hazards flash is as expected.

https://youtube.com/shorts/Ta6X5GTbS1E?feature=shared

 

Is that the rear led conversion kit'
Just did it this afternoon.
Drivers side tail light need a good pull to break it loose...

 

I think you might have mixed up your connections with the switchback and the brake lamps. The turn and reverse lights are supposed to be on the bottom. Amber for turn, white for reverse. This kit moves the turn signal from the top as shown in your video to the bottom bucket.

Double check here

https://www.youtube.com/watch?v=ed_nrppMVE4

 

Yes, VTails.

Does yours work as advertised?

 

Here's a couple more vids,

https://www.youtube.com/watch?v=Q8FIVHF-47Y

https://www.youtube.com/watch?v=f7QzsxakIGo

 

Exactly how I installed them.

Laptop on tailgate for direct access to instructions. Step by step, just like that.

 

Somethings messed up. Mine work fine and have for years.

edit: put the switchback bulbs in the socket where the red brake light bulbs currently are (turn signals) and plug them into the bottom socket holder of the tail lamp.

 

https://www.vleds.com/3g-tacoma-vt-...vjdOZRdhzes7adx86eycSOdG0SPz-XBvaSUBomxGxKOps

6 second mark on the install video shows how they plug in

 

Thank you, that is what I was expecting.

I'll open it back up, disconnect the resistors see if that does anything.

 

But they are white, and amber. Oh I see, check function...

 

Yup, literally, they can only install/plug in, in exactly one way.

Stand by.

 

that's what I meant. The wires not the bulbs are plugged into the wrong spot.

edit: I think.