What Have You Done To Your 3rd Gen Today?

3” readylift, 5100’s in the rear. 285/70/17r feds

 

3” front, 2” rear, on 285/70-17. For more deets feel free to private msg me. Or for more pix, look up “Choyota” on Instagram. Made some changes since with more to come.

 

I got your story on my first trip also, so I found this document on TW. Print this out, highlight the following item in the Warning Section, and take it to your service advisor: "Lane Change Flashing Times Setting" Have them change it from 3 to 7.

 

Mine come in tomorrow. Can’t wait!

 

What LED strip did you buy from @mattgecko?

 

I'm a couple hours away from you with nearly the same truck. Any other tacos in your area?

 

What are those amber fogs you are running?

 

Does anybody have aftermarket fender flares on stock suspension? I imagine it would like a little odd, but I'm not too sure. I would do the 3M tape method for OEM flares on my SR but wouldn't want to deal with the adhesive if I had to move the bumper.

 

Thanks

 

Icon Stage 6 Front Coils and UCAs showed up yesterday. Thanks @JDEMELLO for the amazing service! Now gotta be patient and wait for the rears.

 

When I crank it I do, going to take a heat gun and bend the plastic back and see if that solves it

 

I ordered the under hood kit and started a conversation with him. Told him what I needed for the tool box. Think it is one side of an under rail bed light kit. I only bought the strip and it came with enough wire to tap into the hood kit for power. Then I hit the part store for wire, conduit and a toggle switch to install inside the tool box. Ground it to a bed frame bolt. Just like the hood light I didn't want it to come on in the daylight.

 

Ordered $216 worth of led headlights from XenonDepot yesterday.

Damn you, Rob! (shaking fist at @RobP62 )

Not looking forward to the install. Big hands and short arms.

https://www.tacomaworld.com/threads/led-lighting-conversion.436865/page-147#post-17958035

 

I just had my Icon Stage 4 kit done yesterday! Photos later today.

 

It will differently help some but you may have to...

 

You got this!

 

WHAT SIZE?

 

Have a couple of questions concerning Fumoto valves.

What number Fumoto Valve replaces the drain plug on the oil filter cover and was there adequate clearance between the stock sheet metal skid plate?

What number Fumoto Valve replaces the drain plug on the crank case oil pan?

Any help from those of you who have actually done these mods would be appreciated.

 

Fold-a-cover makes something along those lines.