What Have You Done To Your 3rd Gen Today?

Crap, I have this exact same truck and until I saw the pro grill on it I was not all that interested in one. But that looks good

 

Yea that's kinda what I was thinking. Thanks for the input.

Also what size are your wheels and what's the offset? I believe the limited comes with 18" stock. I'm thinking of 17x7 or 17x8 with 4 or 5 mm offset with ko2 ' s. Think the white letters out with the white truck will look good like your silver does.

 

Put my actual license plates on today. My truck all of a sudden feels old.

 

Thanks!

 

Oooh man that’s a bad news

 

These are 17x8 with a 0 mm offset. Definitely go for the letters out. It would look great on there! I'd have to fish for it but there's a few big threads on here about that particular wheel set up and tons of examples.

 

SWEEEEET!!!!

 

Fox 2.5 remote reservoir
Allpro uca
Allpro Rear std leafs with Fox 2.0
And the VooDoo bed rack

 

I’ll pay you to come clean mine...

 

Thanks!

 

Filled it with some Bmw washer fluid, now my blinkers don’t work

 

Is that a WR?

 

Purchased the plugs from Toyota, pins, wires, and loom I got from my buddies. I've read on here that you can purchase the pins from Toyota already crimped to flying leads, but at an insane amount. I'm a bit OCD, and had to have the wires match the existing harness. Here's a pic of the part numbers.

 

Nice looking mall crawler!

 

Installed 5100s, OME 886, and Headstrong progressive AAL. All with a floor jack, jack stands, and regular hand tools.

 

Loving that front bumper

 

@koditten actually made it for me. It's quite possible you could fit a softopper under it, but space on my rails is becoming limited.
Goal was to be able to use this rack at the same time as my tonneau, but dimensions didn't work out; if you pursue this route, I would definitely find some way to bolt the bracket to both the rails and the rack for mounting to the truck.

Weight limit wise is TBD, but the builder seemed pretty confident in it in everything except for an RTT. If that's your need, though, I'm sure some additional supports could be added.

Here's a video on it:

 

What was the cost?

 

I designed it to allow a ST under it. I actually over sized it. I did not want the ST touching any if the iron when it flexes/ripples in the wind. I own a ST, so I knew what to look for.

The only drawback is you can not callapse the ST. The rack is not tall enough.

 

It's not old, it's now YOURS!