What Have You Done To Your 3rd Gen Today?

NOAUKA Waterproof IP68 Night Vision 170 Degree Car Rear View/Reversing/Reverse Camera Universal Color CMOS Imaging Chip Backup Parking HD Front View Camera - Amazon

RFCC TTG2 Car Camera Control Switch System for Toyota Touch 2/Entune Front View Camera Adapter - Amazon - plug & play

Pretty simple install. The hardest part was figuring out where to put the camera and running the wire into the cab.
The camera control switch system operates the camera from the steering wheel controls. I can press [Mode] twice and it turns the cameras on manually. The rear camera still works as it should but can be turned on manually too.

 

Just installed bhlm w/ rx350 halo/drlswitchback and MESO side markers. These were retrofitted by Kevin @no vtec 4me he does some great work with these headlights.

 

That is excellent. Thanks for the write up!!

Where does the Camera Adapter plug into?

 

Thanks man! I really appreciate the feedback. It’s pretty damn close to OEM.

 

Sorry for being vague.
Everything plugs into the Entune radio. Unplug a few connectors, plug them into the controller, then plug in the wires coming out of the controller into the radio. Under the hood you ground one wire and find a 12v power source to power the camera. About an hour to do the install. If I had to do it again it would take about 30 minutes.

 

Here's the link to the magnets I got.
https://www.ebay.com/itm/10-50-100-...e=STRK:MEBIDX:IT&_trksid=p2060353.m2749.l2649

I used JBWeld to glue them in the back and vinyl tape to cover them so they don't damage the paint.

Hope this helps!

 

THANK YOU !! I just didn’t want to be the SmartAss as usual. Lol LMFAO

 

Which sliders are you running?

 

Fyi, I installed some foam pipe wrap to help protect the bars and provide a bit of filler between the bar and cover to prevent any flapping when at highway speeds.

 

Not sliders, but decent steps. I wouldn't go bouncing off rocks with them or trying to use them as a jacking point. They use the same mounting holes as the factory running boards so it's a simple bolt-on install. Solid, good quality, excellent fit and finish and they look pretty good.

$364 Tyger Auto Star Armor Compatible with 2005-2023 Toyota Tacoma | Double Cab | TG-AM2T20048 | Side Step Rails Nerf Bars Running Boards

https://www.amazon.com/Tyger-Auto-T...r+running+boards+tacoma&qid=1572413600&sr=8-4

I got them off eBay last December a few days after I bought my truck for $228.65 delivered to my door in three days. I don't like the star cutouts but it hasn't annoyed me enough to cover up yet.

 

Love your set up! Looks great!

 

Lights look great. How do your nails look?

 

Pro Grill, Raptor Lights, Cali-Raised LED light bar and brackets finally installed. Also had front windows tinted. Thanks to Mikel at High Caliber Auto Sound and Tint!

 

Sweet I’ll do that !

 

Filled my tank this AM. Use the Gashole without thought. Get to work set my keys on my desk and look down and here is a dime size drop of blood!

It's damn cold and dry here. 15% humidity and 28°F. Somehow I sliced my knuckle open. The worst part is I got blood on my work khakis. Most of it came out with cold water.

I will seek out and fix that knife edge.

 

Nice HDR photography.

 

changed the battery in my key fob, just got a warning 2 days ago, I've had the
truck 4 yrs and a week, not bad battery life. If anyone needs to do it, it's the CR2032 battery.

 

I found these on Amazon which are a little cheaper.

syppo Mini Tie Downs Pair for 2005-19 Tacoma/for 2007-19 Tundra with Deck Rail System

https://www.amazon.com/dp/B07TXC42Z...olid=37S7Q81SMUM6W&psc=1&ref_=lv_ov_lig_dp_it

 

Spot, flood, or combo? Wired straight to switch? Thinking about getting this setup in the combo. I would wire it to a relay through the high beams. High beams would trigger it but you could press the button to deactivate it. Anyone else doing this?