What Have You Done To Your 3rd Gen Today?

Awesome, thanks

 

You’re welcome. Discount tire told me the same thing. I showed them a picture of the guys truck with them on it and told them I was going to trim some plastic afterward. They still mounted them for me and even put them on the truck. I did have to remove the air dam so I could drive it haha

 

If you just want a 2/1 lift, go down the middle and get 5100’s and a 1” block.

While waiting for my last oil change, I found a video that went in to the differences in overall shock length based on spacers vs adjustable strut lifts. bottom line is spacers are garbage; you get more travel and less binding with adjustable struts like bilsteins.

 

Do you have a link for the video? I've seen other people go that route but I'm not sure how it works with stock coils and what setting for the 5100s and everything.

 

I am doing a 2”/1.5” lift with eibach pro kit from headstrong. It’s 4 shock/struts with lift coils. I added the 1/4” taco lean spacer, carrier bearing drop, 1.5” rear blocks, and had them assemble the struts before shipping. It ended up being $771 shipped.

 

Washed it. And removed the front valence

 

New winch, long install

 

I don’t, it’s on YouTube somewhere. search for spacers vs 5100’s I think. I screenshot that image because that’s the important part of the differences.

A top spacer lifts the truck by making the overall length of the coilover longer. This puts a lot of stress on the shock and can damage crap.

A preload spacer and 5100’s effectively do the same thing: preload the spring to make the truck sit higher. They take the same amount of effort to install since you have to take the coil over apart. But bilsteins are longer than the factory shock, so you retain full suspension travel plus have better damping rates.

To raise the 5100’s set the spring perch at the highest clip for a 2” lift, assuming you have a V6 4x4 Double cab.

 

What notch did you choose to set the strut? I just got on headstrongs website and they are offering $60 off of the pro kit.

 

Did you make the harness yourself? Hooked to the stock HU?

 

Only had time to knock the top off of my to do list.
Put the weathertech's on.

 

I'm preparing for the zombie apocalypse. I installed (2) CaliRaised 20W flood compact LED pods on my bed racks. They do help when I'm loading the bed at night.

 

Sounds great across the board man! Be sure to report back with pics once that lift is on!

 

My air dam has been gone. I have had to trim plastics on all of my other trucks so not a problem. I just don’t want to cut the metal.

 

Finished up the puddle pods and installed the ovtune.

 

Will do sometime this week!

 

I agree. I had to cut some sheet metal on my last truck, Silverado, to fit wheels and tires. I was not interested in doing that at all haha. The cmc wouldn’t really bother me but I’ll just see where it ends up after the lift and alignment. My driveway is a pretty steep hill and I rub when pulling into it right now

 

Yup!

 

Cleaned and quick spray wax...

 

Did you do your own puddle pods or MESO?