What tire size would fill in my 3 inch lift?

saving to get my lift and tires put on at the same time. Im going to get a 3 inch lift and trying to find a tire size that will fill it out.. can you give me around what size i should be looking for?

 

i run 275/70/18 on mine with a 3 inch lift

 

285/75/17

 

ive got 285/65/18. a 70 would be a little to big for a 18" rim IMO.

 

Would those fit prerunner with a 3" lift and stock 17" rims they are nearly 34"x11.2" ?

 

You got me thinking now. I think I have 285/75/17 but it may be 285/70/17

Not sure how much of a difference there is there. I had to do some very minor trimming. And I have adjustable CoilOvers that are set around 2 or 2.5.

With a 3" lift you shuold be fine.

 

they're 285/70/r17's almost without a doubt.

~33" tires in metric are:

285/75/r16
285/70/r17
285/65/r18

Please keep in mind that 285mm wide tires will rub on stock rims.

 

There we go, I knew somebody with some knowledge would come in soon.

I am running 285/70/r17 and I have 1.25 Spidertrax wheel adapters.

 

Personally, for gas mileage and driveability reasons, I'm leaning towards a 31-32" tire.

a good example of how this would look on a lifted truck:

http://www.tacomaworld.com/forum/bu...-build-thread-how-did-i-spend-much-truck.html

 

285/70/17 mickey thompsons on a moto metal wheel with 4.5" backspacing. No rubbing and my lift is a toytec ultimate kit. Bigger than that would look overstuffed and stupid.

 

I'm running 305/70/16 on my 2008 Toyota Tacoma 3 inch lift on it

 

Did you have to do a lot of trimming?