Wheel Bearing Hub Assembly

Need recommendations on where to get these. I have reached out to a few individuals. Does anyone have suggestions?

Thanks!

 

I bought the Beck/Arnley off RockAuto
Can’t say how good that are yet.
I have just about 7,500 miles on them.

If you want the best. @05Taco4x4 is the guy to see.
https://www.tacomaworld.com/threads/wheel-bearings-hubs-press-service-4x4-prerunner.537080/

 

I have two of those exact Beck/Arnley units from RockAuto still in the box in my garage right now. I don't need them yet but am at 120,000 miles and I THINK I'm hearing a little noise from the passenger side. I figured in a few months when I need them, supply chain issues will screw me so I bought them a couple of weeks ago.
Keep us posted @TnShooter !

 

Depends on what you're looking for. More details would help. This topic comes up enough around here that using the search function will probably turn up more than you could ask for.

 

I as well have 2 beck arnley on the fronts , have about 10 or 15,000 miles on them plus a couple trips out west , so far so good , also went to RockAuto for them. Don't forget the seals .

 

I will keep you updated

 

I went with ones off eBay that are Koyo bearing with a dorman hub.about 20k ago an starting to hum. I know koyo where stock on early 2nd gen if I’m not mistaken on later years they went to NSK it has a thinker housing. After researching I went with BCA brand off rock auto. They’re NSK which are stock Toyota’s. And I just got two an bought new Toyota hubs cuz I couldn’t get the old bearing race off. Yes you have to press the assembly together.

 

@05Taco4x4 sells a high quality set of front wheel bearings with hubs here on the forums.

I have them and haven't had any problems.

 

I did the same for my highlander and they did go bad in about year, I suspect we had counterfeit junk.

 

I would try to stick with a Japanese bearing manufacturer like Timken, Koyo or Nsk

 

Go with @05Taco4x4 . Bought two off of him this spring for my 09 2x4. High quality hubs and great customer service. Very easy to replace once you have the assemblies.