Wheel offset for stock 2016 offroad

Looking for some new wheels,anyone know what off set I would need?probably stay with 16" wheels and 265/70 tire.

 

Wheel offset is irrelevant without a wheel width

 

Stock 16" wheel OR offset is ET25

 

I would have to say 16x8 wheel size

 

4.5" backspace (0 offset)

 

Ok that's what I was looking for thanks

 

I thought factory rim was + offset?

 

Stock is not 16x8. He was asking what offset he would need for a 16x8, which I answered him. Someone else already answered the stock wheel offset

 

sorry, thought you mean the factory was 16x8 0offset.

 

The stock rims are 7Jx16 ET25, so that means 7" wide and 25mm offset.

 

Does anyone know what the back space measurement is on the oem off road wheels? Will a 16x8 1mm offset with back space of 4.5" or +20 with 5.25" back space fit on stock off road suspension with oem tires?

 

Use this calculator to see how different setups will work. The stock measurements are already entered. Warning. . .you may get a headache looking at all the possible combinations!

 

5" backspace

 

Thanks. It looks like possibly the +20 would fit without issues

 

Maybe...depending on tires.

 

I would stay with stock tires at 265/70/16 for now until they wear out then try for a little bigger tire later

 

How much bigger? Anything over 32" will give you zero to negative scrub radius.

 

Not sure. Maybe 285/70 or 285/65

 

I'do go with the +1mm offset then.

 

Hard time reading the link posted.

I just lifted my truck roughly 3 inches (5160s and eibach springs and 6112s with expedition leafs.

I have stock wheels and 255/85/16 now. I rub the after market upper control arms in reverse and full lock.

Looking for a tire that is same height or slightly bigger and what offset/backspace wheel I'd need to clear it.. never had to mess with wheel spacing before (bronco didn't care what I put on it ) lol