Wheel Spacer question...

I am currently running 1.25" Spidertrax wheel spacers with my factory 16" Tacoma TRD Off Road Alloy Wheels (not Pro). Since the Spidertrax are 1.25", and because of their thickness they completely cover the factory wheel studs, so factory studs don't protrude past thickness of spacer and there is no issue running my factory wheels. I am thinking about going with a .75" Bora wheel spacer and was wondering if anyone is running .75" spacers with the factory TRD Alloys?
I am assuming the stock wheel studs will protrude a bit with the .75" spacer and wanted to know if the studs would contact the back of the stock wheel. I know of someone running .75" spacers with the 16" Pro wheels, buy have yet to find someone running .75" spacers with the factory TRD Off Road wheels that have 25mm offset.
Thanks in advance!
Also, I did reach out to Bora and they replied quickly, they said it comes down to the length of your factory studs (I think the back studs are longer due to drum brakes?) and if your factory wheels have indentations in the back to accommodate for the protrusion of the studs. Just wondered if anyone has had real world experience with this situation
much appreciated!

 

Your oem wheels have pockets...

https://www.tacomaworld.com/threads/bora-75-spacers.535543/#post-17230211

...and, welcome to TW.

 

Thank you!
This is a great site.