1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Wiring Aux driving lights

Discussion in 'Lighting' started by Bigpat5123, Dec 28, 2010.

  1. Dec 28, 2010 at 7:15 AM
    #1
    Bigpat5123

    Bigpat5123 [OP] Active Member

    Joined:
    Jun 4, 2009
    Member:
    #18013
    Messages:
    38
    Gender:
    Male
    New England
    Vehicle:
    09 SR5 2.7L 4x4 m/t
    I have a '09 tacoma under warranty til 100k miles. I just recieved a bull bar and want to mount some lights to it.

    I purchased KC Apollo 55w driving lights to mount to the bar and do not want to hard wire the lights since I am still under warranty.

    I was thinking about running the wire into the cabin and using the 120W 12V outlet under the radio to power my lights with something like this. [​IMG]
    It has a 10 amp fuse and a switch built in. Is there any reason why I could not use this setup?

    I believe it will work as the lights only draw 9.2 amps and 110 watts?

    Thoughts?
     
To Top