Wiring Diagram for Headlight Switch & Lever

Hey All - I'm new to the forum, but have been reading it for a long time.

I am wondering if anybody has the wiring diagram that includes the switch and the lever for a 1995 Tacoma.

My high beams weren't working so I was doing diagnostics and lost all my lights except turn signals, reverse, and brake. I replaced the headlight switch (the one with 7 wires) because i dug in and found a broken solder joint. I can now flash the high beams (but not keep them on), but still no additional lights. I cannot find anything that is helping me understand what the wires are. I have ordered the headlight switch/lever (the lever you actuate with your hand), but there are two white wires and one red wire and I don't know which white wire goes where when I replace it. Hard to know what is going on with no diagram. I have a Chilton manual, but there is no diagram including headlights that I can see.

(I see online that switch is the name for multiple things, so when I say switch I mean the component that sits behind the lever that has the 7 wires coming out, and when I say lever I mean that arm that comes out where you turn the lights on and actuate the high beams and signals)

 

Check out page 82