1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Wiring kit for LED taillights?

Discussion in 'Towing' started by jrdbrn, Aug 24, 2009.

  1. Aug 24, 2009 at 1:57 PM
    #1
    jrdbrn

    jrdbrn [OP] Borne Fishing

    Joined:
    Aug 10, 2009
    Member:
    #20973
    Messages:
    1,428
    Gender:
    Male
    First Name:
    Jared
    Louisiana
    Vehicle:
    '16 Inferno Tacoma TSS
    I installed my own towing package and I need the wiring kit so I can pull my travel trailer. I have the 7 to 4 wire adapter already. What I am needing is a wiring kit for the LED lights. Hopkins has one, but they can't gaurentee it will work with the LED lights. I would really like a T-Connector if possible because I do not want to splice anything.

    Anyone have suggestions?

    That' $600 Toyota package is starting to look like it was worth it lol.
     
  2. Aug 24, 2009 at 4:01 PM
    #2
    uood8

    uood8 If You Search...You Shall Find.

    Joined:
    Jun 6, 2009
    Member:
    #18086
    Messages:
    1,372
    Gender:
    Male
    Greensboro, NC
    Vehicle:
    '16 Sr5 4x4 DCSB
    Pretty much stock
    mine has a big box in the rear that hooks into the tail lights, i can't give you anymore info because i had the dealer put everything in before i bought it. I know its not a simple t connector however.
     
  3. Aug 24, 2009 at 6:01 PM
    #3
    Isthatahemi

    Isthatahemi Well-Known Member

    Joined:
    Apr 29, 2009
    Member:
    #16582
    Messages:
    1,156
    Gender:
    Male
    Vehicle:
    TRD OFF ROAD
    BFG AT's, Weathertechs, Hoppy's brake controller.
    Toyota's kit is 100$, and worth every penny, if your trailer has too many lights, the non Toyota kits will not work correctly. The Toyota kit supplies the Tail with 2 - 15 Amp circuits, whereas the hoppys kit just steals power from the tail. As well if you have a & 7 pin, you will need to run power through a relay from the battery, and a wire from the brake controller. So if you use the Toyota kit, you can just wrap them and run them all together.
     
To Top