Woah! Another retrofitsource.com group buy! Lets get 25!

I'm in for another Gb.

 

You can count me in on the next GB also.

 

some quick shots of my retrofit... at night... in the snow...





lovin' the increased light output and sharp cutoff... pretty fantastic (sorry no shots from in the cab)!

 

WTF! My lights are STILL fogging! I took them off AGAIN, sealed them up AGAIN, and they still fog. Am I missing something or what? ALL edges are sealed with butyl and silicone, all gromets and washers are in place. They were allowed ample time to cure, but they are still fogging, WTF!

 

I dont have any answers for you man. One of my is fogging up so I need to take them off and re-seal them!

 

Hate to say it guys... But when I had fogging with my first headlights.. I had to take them out, bake them, and completely take them apart.. I let them sit inside, in the sun for almost two days to guarantee they would be dry. Then baked them again, sealed, and siliconed with silicone II. Let them cure for about a half a day, then install. No problems after that. I did the same thing this time and no fogging either.

On another note, my light pattern Is weird with mine. They are aligned and straight as I can get them, but thr right output on the bottom (where it hits the ground) is off on the drivers side. It doesn't throw down as much light as the passenger.

 

Is the boot prety snug?

 

Yes, I heated it with a heat gun a little to strech it over the plug, the pluged it in. IDK where to go from here other than start over AGAIN .
But the lights are great, cut off great, out put great, fog......not great.

 

Seriously thinking about starting over with another set of housings. I'm looking for some stock housings now.

 

To bad you are so far way... I'd be down to help you seal them.

 

GB 5 anyone.... missed this one by a couple weeks

 

Count me in if we can get this going again

 

^ the OP is working on it! i know i need to pick up a few things and am watching this thread closely!

 

Thanks, I like the way it turned out too!

 

I'm in for GB #5... that is if I can wait. I'm not the most patient person in the world.

 

i just want Mini H1's and a shroud. Anyone know if slims HID kit will work with that or do you have to get TRS's BI-Xenon kit with it?

 

To qualify for the group buy you would have to get a stage III kit from trs. That would include everything you would need to do the retro.

 

I want to do a kit on my Polaris RZR S I just bought......anyone know which kit would work for that?

 

Call them on Monday, they will set you straight.