WTS: lots of stuff, some 2nd gen, some not

time for me to sell a lot truck parts i've been keeping in my basement. I'm located in Vienna, Virginia, right near Washington DC. While local pickup is easiest, I'll ship anything, but the buyer will pay for shipping, and the bigger stuff might get pricey.

Happy shopping

OEM tube steps (silver/grey painted). these will fit any 2005+ double cab. they came on my short bed, but they might fit a long bed as well, maybe someone can chime in.
when they are bought, i'll give them a good polish and wax to get them all shiny again. just a minor scuff from shoes here and there, but none down to bare metal, and no rust. Sold



original shift knob. grey leather. took it off the day i got the truck, so it's in perfect condition. SOLD

4 Bed cleats. they were on the truck for about 5000 miles untill i got my tenneau. $80 for all 4, but will sell in pairs if needed

Factory sway bar. (don't knwo if there's a difference in the diamiter, but it's off a trd sport). comes with all hardware $60


Factory head unit with 6 disc changer. I painted it to match a speedway blue truck, but if you buy it i'd be happy to redo it black. $45




Stock upper control arms. used for 30,000 miles. ball joints and boots are in good condition, no tears, and no play $100


Stock speakers. not blown or damaged, work great. i will split up the sets if you want, just pm me. price for all 4 is $50


factory carpet floor mats for grey interior. they are a little dirty from the rough winter, but if you are interested in them, let me know and i'll shampoo and steam clean them and send you pictures afterwards $60



Stock antenna. just a minor chip in the paint at the base $15



I have some expanded steel that works great for the satoshi grill. I have a big sheet of it. if you want some, i will cut a piece of it that is slightly larger than what you need, that way you can position the mesh the way you want it and then cut off the excess (you will need a grinder or dremel for this). it comes as bare metal. $10 for enough to do one satoshi



Bull bar by Westin. Chrome tubing and stainless steel skid. only imperfection on the bull bar is a small (one inch) bend in the very back of the skid plate. you can't actually see the ding unless you are laying under the truck. $225 pm me if you want more pictures. comes with all mounting hardware.

Factory bumper: just a little scratch on the passenger side (2 inches long maybe), but i've touched it up since then. if you're interested, i can take a picture of that part, just let me know. I honestly don't have a clue what they go for, so I'm asking $150. i'm assuming that's a good bit cheaper than going to the dealer for a bumper, but let me know if i'm way off mark (too high that is) if the price is too low, keep your mouth shut and take a good deal

thanks for looking
-Colin

 

bump

 

i want some of the satoshi mesh!!

 

x2, shipping quote to 28630?

 

thanks jbob

carter, pm me your info so i can get you a price on shipping. i can't see if being much

 

damn need antenna but if you want to give it to me i will pay shipping

 

tell you what, if it hasn't sold by july 27th, i go to school in melbourne and will be in orlando a time or two the first week of august (family cacation fromt eh 27th to the 7th). i'll give it to you then if you still need it

 

sounds good to me my step dad has family in melbourne he is going there this weekend i think

 

I would take some mesh too! I'm in GA...

 

i wish i was there this weekend...northern VA is way too much city for me.

 

Very intrested in the shift knob if it has not be sold yet. It look to be for a auto tranny im hoping if so if you can send your paypal info and a estement for shipping to blaine washington 98230.
Thanks Rob

 

shif knob is still available. it is from an auto tranny. i'm about to leave for work, but when i get there i'll pm you.

 

sent you a pm rob

 

pm'ed

 

Shift knob is sold.

 

evening bump

 

How much for the bull bar? With or without lights?

 

bump.

everything but the shift knob is still available. enough of the expanded steel left for about 5 grills.

 

Hey Colin
I might be interested in some of the expanded steel. I have been thinking about doing my grill. Let me know if you got some left and I can pick it up from you.

 

sure do have some left. let me know what a good time for you to drop by is and i'll check to make sure i can be here and cut it by then. just shoot me a pm whenever you want