XD monster centric rings

there is a green and a black centric ring in each box. Are they needed to mount rims to a 15 taco ? Thanks

 

The tacoma's hub bore is 106mm I believe. So which ever ring is 106mm I.D. is the one to use.

 

Ok thanks

 

Sorry, the rings are used to help center the wheel on the hub during installation.

The wheels have a larger hub bore in order to accommodate a variety of different vehicles that use the same lug pattern. Since the wheels are lug centric (meaning it uses the lugs to "center" the wheel), the hub centric rings help keep it centered so there will be no vibration issues.

Hope this helps more.

 

^^ That. Most aftermarket wheels are 108mm hub and the Toyota hub is 106.1mm. Really, the lug nuts should be tapered and should center the wheel. Unless you're running large tires, the centric rings won't make much of a difference. The bags they come in should have the size, color probably doesn't matter, they just ran out of one would be my guess?

 

Thank you I understand that
1 ring says 106.25-87
The other says 106.25-78.3

I just want to make sure that either one of them are going to fit and I'm not gonna have to go get another one order and leave my truck on jackstands

 

They're not going to. The hub bore on the wheel must be 106.25mm not 106.1mm like you need. Those must be for 87mm and 78.3 mm which I believe is Chevy.

 

They may not make them that thin. You may just have to run the wheels.

 

I just jacked up my truck tried the rims on the front and back they are 106.25 and fit snug without any Centrics. Thank you for your replies and your help well appreciated

 

No problem, glad they worked out.