1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

xm problems

Discussion in 'Audio & Video' started by dustys8855, Oct 25, 2011.

  1. Oct 25, 2011 at 5:26 PM
    #1
    dustys8855

    dustys8855 [OP] New Member

    Joined:
    Oct 25, 2011
    Member:
    #65841
    Messages:
    1
    Gender:
    Male
    First Name:
    mike
    wisconsin
    Vehicle:
    2011 tacoma access cab
    I have a 2011 tacoma access cab and bought a xm 86180-0w031 and a pt546-35090 xm kit on ebay and have run into a problem. Apperently toyota stopped doing the prewire in the 2011 model so I need the cable for the tuner that goes from the kick panel to the back of the radio. I have a 1 cd unit that is satelite capable. Also the antenna is wrong too but I can install a new one and get around that problem. The cable that came with the fit kit has a 11 pin female plug that is supposed to go to the factory prewire that would be a male plug on both sides to connect by the kickboard and then a male into the back of the radio. This is the cable I am missing, Does anyone hae and idea where i could get one. any help would be appreciated.
     
To Top