Buyer beware: Magnaflow 17115

Just got my Magnaflow exhaust "Pro Off-Road" product num. 17115. Magnaflow website didn't specify any bed length. My truck is a 2011 Double Cab with long bed. The kit mounts to the y-pipe flange and goes to the first muffler hanger, their muffler, then the tip to the last muffler hanger (exits in front of spare tire). The kit says it fits extended cab/crew cab 2.7/4.0, doesn't specify a bed length. Luckily I work at a toyota dealer and confirmed my assumptions, the kit fits only extended cab/ crew cab(double cab) tacomas with the short bed. The mid pipe is short 13in if you hang it in the hanger and measure the gap to the y-pipe flange.

 

I found out the hard way as well but resolved it quickly to fit. Took it to a muffler shop and they welded on a 13 inch piece to extend it for $100. Sounds great. It can be quiet below 2500rpm so when starting in the morning it doesn't wake up the neighbors but when you go above it watch it. Sounds way better than the Borla I had on my last Tacoma.

 

Will the

$442 Magnaflow 17115 Large Stainless Steel Performance Exhaust System Kit

Magnaflow 17115 fit the extended cab 4x4 sport? Im on the verge of buying, but the website doesnt state it clearly that it WILL fit an extended cab.
it says extended-crew cab short bed.... now unless im totally clueless isnt it either (Extended cab OR Crew cab?)

this is from the Magnaflow Website-

(V6 4.0L; Extended-Crew Cab/Short Bed
Off Road Pro Series; 5 x 14in. Muffler; 2.5in. Tubing; 3.0in. Turn Down; TURN DOWN IN FRONT OF REAR TIRE)

Please help!

Thank you

 

It would probably be safe to assume that the extended cab and the double cab short bed are close if not the same length.

 

Thank you for your help!