2011 Tacoma SR5 Fog Light Installation.. Need some help Please

Hey guys, need a little help getting some aftermarket oem lights installed. Bought these off ebay.

http://www.ebay.ca/itm/Smoke-Lens-Fo...d3440e&vxp=mtr

I looked throughout the bumper , under the hood and do not see any pre wiring done for my truck. I have a 2011 Tacoma SR5 V6. Within my fuse box there is no relay installed. My kit that I purchased has switch, relay, harness, bulbs, housing. I have popped the switch cover off and there is wiring and a connector of where my fog light switch should go. The switch that was provided in kit has a different connection type. Would this be the only pre wiring that was done? Do i need to use that connection or can I use the one in my kit.
Secondly, I'm having troubles finding where 2 other connections go with my provided wiring plz look at attached photos A /B. Really appreciate any help. Thanks guys!!

 

Uh, SR5 V6 trucks should have fogs from the factory...

 

No fogs in mine. Just dummies.

 

i did mine over a year ago, i think the white wire is your power and brown one goes into parking light. those connector need to be cut off and spliced into proper placement, atleast thats how i did mine. mine was not a true plug and play connection. these kit are all about the same. there are a few how to's on here for doing fog lights. i'll see if i can find a link for you! i also brought my kit off ebay. looks just like the one you posted.

 

http://www.tacomaworld.com/forum/2nd-gen-tacomas/204749-2012-fog-lights-solution.html this is the thread i used when i did mine, hth

 

http://www.tacomaworld.com/forum/li...light-installation-need-some-help-please.html

You don't need multiple threads on the same topic created within minutes of each other... Make one thread and bump it, you'll get your answers.

 

nice looking ride pugga!

 

Thank you