MaxTrac spindles group deal by HeadStrong Off-Road

HeadStrong Off-Road is kicking off this holiday season with a group buy on the MaxTrac spindles for your 2005+ Toyota Tacoma. The group buy price will provide an instant rebate of $80 off normal MSRP, that means you pay $460.00 out-the-door. This super low price also includes FREE SHIPPING to the lower 48 states. Shipping outside of this area can be arranged by contacting HeadStrong directly. Also as an added savings California State sales tax is going to be paid for by HS and is included in the $460.00 price. For more information, call 951-654-9630 or e-mail them at headstrongoffroad@hotmail.com.

So here is how it will work:
Place your order by simply typing in the coupon code “TW Discount” at the check out cart. No minimum order is required for this GB. Follow the link to place your order. For California residents, please call or e-mail HS to place you order

http://www.headstrongoffroad.com/maxtrac-spindles-for-05-toyota-tacoma.html

Note: These spindles fit the 05+ Tacoma, 03-08 4Runner, and 07+ FJ (2WD only)
Ductile Iron Construction
100% Bolt On Installation
Maintains stock ride quality
Increased Ground Clearance (4" lift)
6-lug 2WD vehicles only
4.75" Max Backspacing w/ 17" Minimum Wheel
+0.75" Track Width per side

http://maxtracsuspension.com/product/05-13-tacoma-fj-cruiser-4-lift-spindles/









4" maxtrac spindles on the front and 2" blocks on the rear ( blocks are not included)

 

Bump

 

Anyone want a set

 

You would probably get more interest if product pictures, product data, and a link to the manufacturers website were all listed.

 

Hey good point, OP feel free to use this or compile your own infor


Some info:

• Ductile Iron Construction
• 100% Bolt On Installation
• Maintains stock ride quality
• Increased Ground Clearance (4" lift)
• 6-lug 2WD vehicles only
• 4.75" Max Backspacing w/ 17"
• +0.75" Track Width per side

Link to Maxtrac website (go to link in OP post to buy):
http://maxtracsuspension.com/product/05-13-tacoma-fj-cruiser-4-lift-spindles/


Happy Maxtrac customers and to get more info on them go here:
http://www.tacomaworld.com/forum/suspension/203889-maxtrac-spindle-lift-2nd-gen-prerunners.html

 

bump for update

 

New update!!!!

 

Looking to get a pair this month, How long does the group deal last?

 

Until the end of the month if I'm not mistaken. Used to say this until the update was made

 

Correct, until the end of the month.

 

Bump

 

to the top!

 

I dont think the 17" inch wheel is necessary. I have a 16" wheel, its all about backspacing.

 

Yeah you don't need a 17" wheels, the write-up is misleading. The minimum part should be removed.

From my understanding its 4.5 max BS for 16" wheels and 4.75 max BS with 17" wheels. I updated what I posted and ditched the minimum. Its funny but I actaully got this from Maxtracs website.

 

^ what about 18" wheels

 

I'd imagine it would be better to have a bigger rim, but not sure though.

 

I mentioned this in the Maxtrac thread and Bob from maxtrac confirmed, but basically the spindle arm tapers back so a larger rim can essentially have greater BS due to having more clearence from the spindle.

Hope this makes sense. I can explain further if needed

Bottom line if you have 4.5" BS you are good for a 16" rim and up. The bigger the rim the more clearence from the arm meaning you can get away with greater BS. This is why you can have 4.75" BS with a 17" rim.

 

Bumpin it

 

subd

 

Its Wednesday but feels like Friday

Happy day before Thanksgiving

BUMP!