coil over help

I am in the market for coilovers with resi. Either fox or king. will be purchasing them used if I can come across some. I have an 05 prerunner. will a 10inch coilover fit? bolt on?

Im just really not sure what im looking for.

 

NO way. They make an oem bolt in version. Unless you are going to use a LT kit then that is all you can run and you will have to get aftermarket uppers also.

These are extended oem style from kings

 

how big is that coil over?
thats exactly what im looking for, what exactly is it?

 

"extended" means a little over 6", like 6.5" or so

anything more and it won't be a simple "bolt on" with the stock shock tower

 

It's 2.5 body. I think they use an 8" body for basically a 6" shock. I think the specific measurement for stroke length is 5.5". Collapsed they are 16.7" and extended they are 22". Close to those numbers. The only way to use something longer is a full LT kit.

 

so 8inch is the biggest I can get without going long travel?

 

No. you wont fit an 8" in there.

 

The oem style from fox, icon, or king is what you have to pick from.

 

and the oem would just be a complete bolt on and ready to go right? along with ucas

 

Yes they will bolt in with uppers to allow for a little more droop if you went with the ext versions. The uppers will also help get your alignment back.

 

yeah im def going with the ext versions. how hard are these to find used?

 

Pretty tough. They pop up now and then and go quick. Usually go fro about $1000-1200. It's not much difference then just waiting another month to save a little more and buy new ones.

 

could also try this
http://www.tacomaworld.com/forum/su...vers-oem-replacement-use-2nd-gen-tacomas.html

 

bought the ext travel fox 2.5s with TC ucas, fox 2.0 rears with resi and icon 3 leaf mini pack. all going in on saturday!!