Houston area (along with DB's not from Houston) BS thread

When I got my tri-bike, it was covered in pink hello kitty tape. It only took 2 races for me to decide it wasn't the right color for me.

 

Id

I'd laugh.

You'd have to deal with my Lady's wrath, though.

 

FIXED!!!

 

Uniden PC78Elite

And it's crammed in my center console

 

Needs more homebrew

 

I like the 90 degree microphone plug. is that an aftermarket adaptor, or the factory fitting on your cord?

 

Cheaper version of the disconnect
http://www.americanradiosupply.com/...L01ZBx2jfRty_XYE3RyTxety8muZvZ5163BoCgPzw_wcB

 

Clamshell is easy. Just get a bearing puller to remove the carrier bearings. Bearings can be put back on locker. Measure the the old carrier then shim the locker so it measures the same.

Trail repair


Arb install in a clamshell









Cut the diff mount bolt about 1/2"-3/4". Makes taking the diff out and putting it back in really easy next time you have to take it out.

 

It's an aftermarket. It's the only way this setup would work on it. I can only find it in right angle.

 

I was thinking a CB would be my next purchase. Looking at Cobra 75WXST. Anybody have any experience with that one?

 

I am running one, I think @bakerla is running the same one as well. I would recommend it.

 

Sweet. Do you have a write up on how you wired it?

 

It's pretty straight forward. If you want we can install it in about a hour when I have some time. I am in Nebraska right now but will be back around August if you want to wait that long.

 

I think I can figure it out. I should have asked where did you mount that control box.

Edit: Never mind. I found this https://www.tacomaworld.com/threads/cb-stealth-install.269067/

 

I'm running one as well. It works just fine.

I tossed mine under the center console and ran the mic cord out the side between the carpet and the plastic.

 

Watcha doin in Nebraska?

 

Coming soon!

 

i like a lot. nothing rinky dinky about that grill!

 

Nope. They're one piece, waterjetted, powdercoated, and precision bent.

I'm putting the 2005-11 one on mine and someone else is getting the one above. We'll have install pics and video as soon as everything is installed.

 

And I'm also picking up a couple sample single row 20" LED bars that should go nicely with the new grilles. If the quality is there I'll pick up more.