led turn signals

so if i get that fixed think it will be ok? @PeeRunner

 

ive checked both of the boxes and all the fuses are good however i havent checked the relays because no one around here can check them i dont think. @Rock Lobster

 

No. That ACTS isn't the issue.

 

so i guess my best option is to replace the relay @PeeRunner

 

Looks like your relay blew and the surge caused the engine code. Take the relay out and see if you can smell a burnt electrical smell. You won't necessarily smell a electrical smell but if you do I would go out and buy a new relay. Otherwise have it tested if you can.

 

i aint no good at trouble shooting lol @DoorDing

 

which relay would it be under? @Herniator

 

Under the hood in the fuse box it should be labeled under the fuse box cover.
There is also a fuse box in the vehicle but the relay should be under the hood. Check their first.

 

ok whats the name under the box? @Herniator

 

I searched and found this post. check it out.
https://www.tacomaworld.com/threads/turn-signal-hazard-flasher.90079/

 

Is that where the relay for the drl and turn signals are? @Herniator

 

Just want to point out the half dozen posters now helping people out regardless of irrelevant bullshit.

Oh, and thank them.

 

I think so, my wife isn't home right now and she has the Toyota. Can't check.

 

Okay I'll check and post shortly!

 

I just checked under there and there's no fuses

 

Just for giggles. Do you have other fuses you can install and just verify the fuses you are checking that look fine actually are? In regards that the problems persist even with a new, correct fuse installed?

Same for relays if possible. Auto parts store will have them for short money.

 

Just replace the turn signal fuses? @PeeRunner

 

I'm assuming the turn signals, markers and DRLs are all on the same fuse or relay.

 

@fergyz