led turn signals

It says the fuse is turn&haz fuse no fuse for drl

 

Sounds familiar. IIRC.. this is misquoted.

Bolts for hwhat?

 

@BamaToy1997

 

Oh my.

Just you and Mrs Ding on trips?

 

i don't know what the change has been made 12+ to wiring... but earlier models have seperate fuses. the parking lamps are on the "tail" fuse. turn signals are on a different fuse.

 

DRL is controlled by the BCM. early models you had to switch out the relay and a secondary plug/jumper on the BCM. i converted to stock DRL's on my truck years ago.

 

Got an even bigger problem now only my headlights and break lights work and turn signals even my running lights inside my truck won't come on

 

And I didn't even do anything

 

So what all isn't working?

 

My drl my regular running lights and my interior lights only thing that works is my headlight brake lights and turn signals

 

Id yank the turn signal relay and see what happens. Your turn signals will break, but everything else might start working.

 

I don't want my turn signals to break

 

Yes, they will be broken when the relay is removed. But if everything else starts to work then you know you need to replace the relay with a working one. And if removing the relay does not affect anything (other than the turn signals), then put the relay back and you will have determined that the relay is not causing your problems.

 

I've disconnected the batteries and still nothing

 

Try swapping relays.

 

https://www.tacomaworld.com/threads/bamatoys-garage-and-diagnostic-center.299989/

 

Gotta admire the mods on this one.