fog lights

Ok I seen on instagram a guy had rigid industries pods in his fog lights dose any one kno how to do that and if they fit in there without cutting or Wat and would it even be legal I'm wonderin how they'd fit on a 2015 tacoma the newer front end fog lights

 

Pull your stocks out and see, if the rigids fit.
Or maybe take a measurement or two.

Man made duct tape for a reason.

 

I put them in the bumper of my 2011, post #33 in "my build"....

 

Checked out ur build page man rele like the grill mod you did see only thing that has me wonderin I have a 2015 tacoma has the newer front end with the diff shape fogs I see yours game with the to pieces that go around the fogs wonder if that'll work with mine

 

thanks!...I think the fog light holes and the bolt holes are the same on your truck. you can ask Rigid as the whole kit came from them. can you look underneath and see if the housing around your current fogs looks like mine?

 

YES I could check that out I am wantin a set of then for my fogs I will email rigid did everything you need come in that kit

 

I know the kit works with 2005-2011 I THINK someone was able to fit them on a 2012+ but I'm not certain. I got some bezels cutout to fit duallys, I know I just have to figure out a bracket system that would work.

 

one kit had the lights, relay, switch and wiring harness and the other kit was just the bezels and hardware.

 

This is what I did: https://www.tacomaworld.com/threads/rigid-duallys-in-stock-fog-light-location-all-done.337678/ I think rigid has come out with a kit since then though.

 

I managed to get two large stainless steel fender washers, one on the inside and one on the outside, on EACH side of the housing, so the allen head bolts didn't pull through the plastic when I tightened them down. i assembled the whole fixture first. didn't take the bumper off either....

 

1. I have no idea how you pulled that off but kudos.
2. Your brackets are upside down.

 

yeah, someone else told me that too and as you know what a biatch it is to change that.....im going to leave them that way !