What Have You Done To Your 3rd Gen Today?

Agreed. If he gets rearended hes screwed and will be at fault

 

All I know is don't put Cessna nose gear lights in a '74 Monte Carlo or the Nebraska State Police will flip right the fuck out.

 

its a way to haul mountain bikes or road bikes, easier than my old bike rack

 

huh

 

Unbelievably bright headlights for the middle of nowhere. Instant daylight (back in the 80s before halogen and LEDs). It's all fun and games until the oncoming car you just flashed your "high beams" at turns out to have a blue bubble gum machine on top.

 

I like the tailgate pad but the first thing I saw was the classic look on your dogs face as if he/she was thinking, "come on put the camera away and lets go play!"

 

Shit meant to post this in this thread but started my own I am getting some rubbing after install of TC UCA's that wasnt there when I had the stock UCA's on.

https://www.tacomaworld.com/threads/added-total-chaos-ucas-now-have-rubbing-at-cab-mount.415250/

 

Been there, done that

When I was in the aftermarket parts business it was also called a tank light.

 

I will be after Gulches

 

Only because your current bumper plans on doing some tree hugging.

 

Is that an offroad park?

 

The TC UCAs move the wheel back slightly to allow for better alignment. I had the same issue and needed to trim the area you circled with a razor knife. I still rub the cab mount slightly at full lock in reverse only though. Going to CMC this week.

 

makes me feel much better hearing that. thank you. Have you got a quote on the CMC how much are you paying for it or are you doing this yourself, I was quoted $250 is that legit?

 

Installed 3" blocks in back to match the 3" lift in front...

 

Sounds about right. I was quoted $200. I ended up just buying the BAMF CMC plates from their website. I'll do the chop and a friend is coming over with a welder so I can weld the plate in.

 

3 INCH BLOCKS?!?! I hope you don't plan to off road

 

you got a link to the BAMF CMC plates i dont see them on their site?

 

nevermind found it here:

http://www.bayareametalfab.com/CMC-Cab-Mount-Chop-Brackets_p_15.html

 

For reference:

https://www.tacomaworld.com/threads/3rd-gen-2016-cab-mount-chop-plates.399153/

 

No off roading...