Interior mod ideas

Does anyone have a response to this? I'd like to know the same...can the tweeter covers be removed. Also what is the best paint to use on the interior?

 

Need to take off door panel and remove plastic weld from back of bezel .When putting back need to glue back on. Duplicolor trim paint (black) works good.

 

Thanks for the reply @hemitruk, that answered my question completely hopefully it helps @Colon3lcrunch as well, he had the original question.

 

led interior lights (I read somewhere that using a red light helps preserve night vision haha)

 

Just re did cup holder . Because wanted to do something....






Added another panel .Will put couple switches I need to move

 

One of the first changes I did in the truck as well. Have both a red (Left) and white (Right) LED installed. Installed one red based off former tactical work.

 

Very nice ... clean look ...

 

Just noticed the dodge dakota sport font.

 

Red led foot wells

 

Same mod to match with my Flyzeye

 

Where did you buy the LEDs to use in the foot wells? Want to do this mod but not sure what LEDs to use.

 

After many blue LED purchases(all failed) I contacted Flyzeye and was kind enough to send me some.
I soldered my own 1k ohm resistor to each LED.

 

Where is the light on the console/shifter coming from?

 

http://www.flyzeye-designs.com/V2W_1214.html

 

Oh, cool. Thanks!

 

This was also one of the first changes I did. However I put the red in the dome light and have white LED's in the map lights. Good idea to put one red and one white in the map light location!

 

Bump for more cool ideas!

 

That MPG display...where did you get that? Interesting...

 

Black'd out a little more of the gray and added some more oem different yr model parts to the list. I have 2008 truck with 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2015 and now 2016 parts on it. This time.........2016 black sunvisors. A little, very little, modding to make them fit. Elongated the mounting holes 1/16th inch and had to ground flat a couple ridges inside the mounting foot so it'd sinch up tight to the body. Also required longer bolts. Other than that, ordered some vanity stickers from 3rd gen fs to hide a couple of the warning stickers on them. Liking the way the whole thing extends on side window vs having the extenders in the gray visors. Make the visros lighter and less prone to sag. These are same measurement as 2nd gens and fit the indentions in the headliner just right. Now to steam off the warning stickers on the bottom of them, lol..............

 

More details on this please. I want to be like you