What Have You Done To Your 3rd Gen Today?

MERCA, FUCKING A!


https://www.youtube.com/watch?v=IhnUgAaea4M

 

Are these available for purchase?

 

The front of the seat put pressure on the backside of my leg. My back also hurt after just a 30 mile drive. Glad I traded her in.

 

Fogs look great! I am not able to select the vehicle year on the Lamin-X website. Did you have issues like this or did you order a universal application film? Thanks

 

Appreciate your input. I agree replacing the seal would at least eliminate that as being suspect. The smear is roughly 3/4" wide. The trip meter reset has been seen here. I actually got a copy of, and forwarded to the dealer, another owners receipt where a dealer replaced the entire cluster for the same issue. I am fairly confident the annoying squeak is the radiator support(s). Their fix was removing and greasing the sway bar bushings. I am upset they did not drive it 15 minutes to hear the noise as I left boldly on my list.

 

I have not heard that but do not doubt you. Just weighing all my options if the Yota isn't completely fixed. Not a lot of options.

 

THANKS Man! Yep I am in OC area. That was at Fashion Island. I got the wrap done by a good dude in Santa Ana at a place called SYNC WRAPS. Ask for Jerry, its his business. Took about two hours. The waiting room had Netflix, XBOX and games, Wifi, snacks etc...Here is the yelp page: https://www.yelp.com/biz/sync-wraps-santa-ana?osq=car+wrap&search_key=48950 - It was about 160.00

 

No issues what so ever selecting my vehicle ... i ordered the exact fit ones for my 2016

http://www.lamin-x.com/SearchResults.asp?Search=16TOY3861+Fog+Light+Covers&Submit=

 

Added a little lift and tires!

 

Same thing I thought, I was actually sad, and I waited four more days before putting them on

 

Still in the final phases of preproduction, but they should be available soon. Here's the thread for info and discussion.

https://www.tacomaworld.com/threads/2016-sso-slimline-bumper.434910/

 

I was a Bison. Class of 96.

 

Pinstriped with some bushes outside of Lincoln, MT. I am actually not as sad as I thought I would be. The pinstripes beat the plates. But why buy a truck if you never leave the pavement. This truck was bought for adventure not to look pretty just sitting in my driveway.

 

No joke! I'm a little younger than that, but me too. Haha

 

So was I 1986

 

Put a chrome 4.0 on it

 

Why? What does it stand for?

 

I have been getting gunk on the inside of my passenger window when I put it down and back up. I thought my wife and daughter must have spilled a coke on it or something. But it was resistent to soap and h20. Super sticky and I used wd40 first, then went with lacquer thinner (a little risky on the tint) to remove it. and keeps coming back. I almost think the rubber gasket trim is melting.

Did you have this problem? Your post reads like you are looking out for another TWer, if so could you refer to the original posted message. Thanks .

 

@Member1Zillion pics of the FJ please!!!

 

The 2nd gen guys always brag about the extra power from the 4.0 and the Lord Humongous is an unapologetic lover of chrome.