Need help with coil springs!

I am about to change my shocks/struts on my 96 Tacoma. I have new pro-comps and a new steel winch bumper with winch and it weighs a good bit. My coils are 20 years old with 333000k miles. What could should I get? I know nothing about these things so help a brother out. What is too much, what is too little? I'm out of town working right now and do not have any pictures to show:/

 

A very broad question with many potential answers. Here are a couple of link to good threads on here. I suggest you familiarize yourself with the content of these threads as a starting point. In them you will find answers to all of your questions in one or both of these threads. Good luck with your search.

https://www.tacomaworld.com/threads/old-man-emu-setups-on-1st-gen.141055/

https://www.tacomaworld.com/threads/bilstein-5100-eibach-gallery.176037/

 

I believe the OME 886s are rated for heavy front end loads. They'll give you a couple inches of front end lift over stock height though, maybe a little less with the weight after settling.

 

IIRC, 886s are for 2nd gens

 

How much lift is desired if any?

 

If you're going with OME coils, you'll have to change the struts to Bilstein 5100s or Nitrochargers. I don't think Pro Comp would be applicable but I could be wrong.