What Have You Done To Your 3rd Gen Today?

I don't disagree and am certainly not offender. Some little boys here just run and hide when people question them, guess they can't take a little competition. Anyway, there is of course a proper wheel/tire fitment that needs to be followed. 4"-4.5" narrower rim than tire will never hurt anything other than maybe a bogger or other bias ply very soft tire. I ran my 14.5" wide boggers on a 10" rim. Yes they were wearing funny until I found their happy spot at 18 PSI. Just takes a little tinkering and all is well.

 

Get your dicks out of knots boys. Sheesh

 

Sexy stuff going on under there! What did you go with for bump stops?

 

I purchased black TRD semas and thinking of going 275/70R17. I'm on stock height for my TRD off road 4x4. I heard some people say the size is good and no rubbing issues....any one have the same set up with any issues? I read that last post/link and it makes me feel a little better being that TRD semas are7" wide. So I hit the minimum. I highly doubt I'll be doing any heavy off roading....so lift is gonna wait until there are more options out. But the wheels and tires might lift it a half inch....lol. I just hope I don't get any rubbing :/ with stock height...

 

Icons 2.0 hydraulic bumps haha suspensions all icon except for the toytec front diff drop and toytec front sway bar spacers

 

Love this truck

 

Does the noise from the bump stops annoy you?
When I put weight on the rear and drive it makes that clashing noise on mine

 

I haven't really heard them at all to be honest. It might be due to my exhaust for me not hearing it but my hearing isn't all to good anymore either haha

 

I went with the lower spacers provided because I had tire rubbing issues and by keeping the bump stops lower it will help with the rubbing.
Plus yours is a 2016, looks like they may have made an improvement.

 

Haven't had any rubbing problems at all in the front or rear. I will be doing a cmc just for moral insurance

 

+1, looks extremely clean!

 

Somebody had to do it lowered 16 pics:

 

You will need a lift. I put the wheels on before the lift and it rubs really bad.
https://www.tacomaworld.com/threads/17-trd-pro-rims-and-bfg-at-tko2s.426902/page-21#post-12923545

 

Lowered 4x4? lol At least it isn't a lowered trd offroad!

But that being said looks good!

 

yeah at some point might look into how crazy it would be to convert to AWD so that i can run 4x4 on the street without blowing up the front diff... would be really sweet i think

also, side note... V6 and 6SPD combo is only available on 4x4 2016 tacomas. I would have gotten a 2wd were that not the case

 

Haha I was tempted to dip the bezel too but I did a few mock ups with Photoshop and decided to leave some chrome in place and keep things stock-ish. It blends nicer with headlights, exhaust tip and other shiny parts until I can black them all out =D

 

Just finished installing the Under Cover SE ... It's a solid choice over the OEM cover and looks wayyy nicer too if you ask me. You don't even have to remove the rails or modify the bed caps !

 

Customized my old license plate frame, added 3rd bed rail and installed bed lights with remote (thanks Matt Gecko), changed interior lights to LED