XD wheels?

IMO i would get the 285's rather than buy 265's and wish you would have got the 285's. pick up a used spacer lift until you get the suspension you want? i dunno...my .02
gl man

 

I like the XD Addicts in black... probably gonna get these for my Pyrite truck.

 

I think your wright, maybe hearing the rubbing will make me hurry to buy the suspension mods!

 

To be on the safe side if i were you i would look into buying Bilstiens 5100s and adjust them to 2.5. I would compare spacer lifts to women wearing heels they look good but they get uncomfortable after a while.

 

I did the 17x9 XD Revolvers in matt black...I DON'T think you should get them! I don't want them to be the next Moto Metal 951s and see them all over the place.

Think I paid around $650 or so shipped if I recall. Wrapped them with ProComp ATs 265/70/17s with 5100's at 1.85, had to do quite a bit of trimming to eliminate the rub.

FWIW

 

how much do 5100's run?

 

170-190? for the fronts

 

$300 go to http://downsouthmotorsports.com/

 

I saw some guy in a silverado with those with a huge back spacing, i was about to buy them actually but i realized they were going to have huge rubbing lol.

 

265 rub? you have any pic's of your set?

 

you can find them used aorund 100 bucks for the fronts or so.

 

x2
how are 265's rubbing?

 

I've got the xD Revolvers, I love em

 

almost forgot...

 

x2

 

I'll get some pics. I had to trim the front nubs off the wheel well, and did MAJOR trimming on the front mud flaps and had to cut off the inner corner of the Fender flare. on the back side.

My mud flaps are just little nubs now but I had lines on my fender flares from them being on for a 2 years, and with my running boards they still give good protection from chips.

My friend runs MotoMetal 951's with AT tires, same offset on the rims, same size tires, (265/70/17) and didn't have as much rubbing as me, but you can see the procomps have a lot wider tread pattern than his ATs.

Some pics I happened to have on my computer....

 

I have 17x 9 black hoss and i like everything except for the center caps. They are cheap chrome plastic. Word of advice, take them off yourself before you take it to a tire shop because they will crack them. Just place something soft behind you and pull like hell.

 

I love my monsters! The following link has all the info:
http://www.tacomaworld.com/forum/2nd-gen-tacomas/66044-first-mods.html

 

Addicts for the win...

 

Not bad but everyone has black wheels today...