2012 TACOMA FRONT END CONVERSION RG11

Shouldnt 05-10 have bumper brackets too? I know they're different, but I'm not sure what's different about them. Contacted Michael @Pelfreybilt and got install instructions for both versions. They seem to be the same for install, but hard to tell.

 

The brackets different. I did the conversion and had to buy the 12 up brackets. in your case since you swapping bumpers its mostly for mounting bottom of head light and bumper filler . Try check out Ricks (squint )s set up or someone else with 12 up with bumpers than you get a better idea.

 

Pic you can see black clip circled is were bumper filler clips into . Circled part on fender is were other side of bumper filler mounts. Other circle part is were bottom of inside of head light mounts.

better pic

 

Thanks! Makes sense after you pointed out the mounting for the filler and headlights.

 

I took apart my front end today and just bought all the brackets. Ill post some pics later to explain why you need all the listed brackets, even if you're going aftermarket bumper

 

Can you post part numbers? Please and thank you!

 

I ordered everything in the OP. Below is a picture to help explain the parts' location. If you're going aftermarket bumper, the only one you MIGHT be able to avoid ordering is green. I wouldn't recommend it though because it acts as a cross-brace and gives strength for the headlight mounting and the hood lock bracket. My build has some other pictures of my test fit.


Green is replaced by: 52521-04050 RETAINER, FR BUMPER x1

Yellow is replaced by: 53273-04030 BRACKET, FR BUMPER A x1
53274-04030 BRACKET, FR BUMPER A x1

Pink is replaced by: 52125-04020 EXTENSION, FR BUMPER x1
52126-04020 EXTENSION, FR BUMPER x1

Purple:

$10 53271-0B010 53271-12060 for Toyota 4Runner Corolla Echo Highlander MR2 Spyder Prius Tacoma Tercel Lexus GX460 GX470 RX300 RX330 RX350 RX400h 1993-2014

53271-0B010 BRACKET, HEADLAMP x2

Blue: 52531-04010 RETAINER, BUMPER FIL x2

Also need:
52522-04010 RETAINER, FR BUMPER x2 (little white piece)

53935-04020 PROTECTOR, FR END PA x2 (clips to fender side of bumper filler)

 

Going also need 2-5393504020 bumper filler retainer mounts onto bumper filler and snaps onto fender and 2- 5252204010 upper retainer fastener for headlight bottom mount (# 2 in post 184)

 

Raja that. Added those to my post

 

Thanks for the info.
Does the 05-11 aluminum reinforcement bar and bumper brackets can not be reused for the conversion?

 

What tires are these? I'm looking for new tires soon, these look nice.

 

Cooper ST Maxx

 

Hey guys, first time post and I got a couple question, surprise eh?!


So I have a 09’ Tacoma ex cab, its pretty much perfect, I put the time in to take good care of it, I dont put many miles on it, so Ill be keeping it for a while... but it had a encounter with a non movable object on my property, so I figured I might as well do the 2015 front end, since its not much more than putting her back to her former glory.


Ive read the thread on the swap and I just want to make sure Im on the right page, and also ask about the couple extra parts I might need due to the damage.


So…


-1-HOOD-

Ordered one of the new generic 2015 replacements off ebay that are already primed, its from car parts wholesale, seem to have good feedback, too bad there arent any nice carbon non useless scoop options, wouldnt as much want the look, but the weight savings would be cool, ether way 190 bucks for a few hood is a good deal as long as its as good as they say this thing is.





2-BUMPER W/WO FOG LIGHTS AND REINFORCEMENT BAR

Thinking of getting one of these “kits” thoughts?

I wont be running a front license plate, since I don’t chase police cars much, thus I’m looking for one without any holes or anything, are these generics OK, or are they junk compared to OEM?

Seems like this is almost everything I need for the rest of it right?

.

http://www.ebay.com/itm/2012-2015-TACOMA-FRONT-BUMPER-PRIMED-END-GRILLE-FILLER-REBAR-BRACKET-W-HOLE-12PC/171329182940?_trksid=p2047675.c100623.m-1&_trkparms=aid=222007&algo=SIC.MBE&ao=1&asc=38530&meid=9dae8d57619b4309be6befe46d6a1f66&pid=100623&rk=2&rkt=6&sd=201089972254




I, will order the OEM fog light fillers, and I also just ordered the XB LED projectors from TRS, question is since the lower piece of the bumper/grill appears to be meant to be left as bare plastic, should I buy that part OEM too??



3-RH/LH HEADLIGHTS


Just got two brand new 2015 SR5 "take offs" from a dealer on ebay, 180 each, damn



4-FRONT GRILL

Bought a 2015 TRD Pro grill

I also bought a chrome bezel, I know its the PRO look, but Im not as much trying to make a clone, as I like the more subdued oldschool look of the Pro grille



5-BUMPER FILLERS RH.LH

Seems to be included in the ebay bumper kit





Now which of these do I still need??

52531-04010 RETAINER, BUMPER FIL28.17

52125-04020 EXTENSION, FR BUMPER124.42
52126-04020 EXTENSION, FR BUMPER124.42
52521-04050 RETAINER, FR BUMPER134.37
53273-04030 BRACKET, FR BUMPER A122.86
53274-04030 BRACKET, FR BUMPER A122.86
53510-04040 LOCK ASSY, HOOD136.33
53209-04020 BRACE SUB-ASSY, HOOD125.94
90084-54011 CUSHION, HOOD2.89
90959-01136 HOOD CLAMP35.33
53271-0B010 BRACKET, HEADLAMP27.99

52522-04010 RETAINER, FR BUMPERx2
53935-04020 PROTECTOR, FR END PAx2

anything else??


For the damaged parts, seems like I might need a few pieces, already ordered a new OEM skid plate, but it looks like Ill need #7 and #2 as well, are these just plug and play bolt ons?









For paint, would it be best to have the parts painted before assembly, Id take them to a place that works on new damaged toyotas right off the shipping trucks, Id also bring the damaged hood in with the new parts so they could confirm paint match.



Thoughts?? Comments???


THANKS!
5NT


















Didnt even scratch the actual bumper, at least theres that, I take it I still need a 2012 or later replacement for this metal reinforcement right?

 

Ok so that front end kit On ebay looks like a good deal. But it doesnt look assemble you would have to get evrything together which looks harder to do. I would try to find something Assemble already. Reason why i bought OEM/Color parts. You will neeed all of those small parts like brackets plus yes the reinforcement bar.

 

First you have to tell us what you did and how many beers you had before you did it. It's the TW rule.

 

Roger that.

Only issue is I can't find any good assembled front bumper setups for sale...


Think I have a game plan on the swap.







Anyone know if the damaged parts (#7 & #2) are bolt ons, or if I'm going to need my drill and welder??

 

Good question .. just get a hammer lol fix it

 

I'm about 80% complete on my conversion. I have all the parts just trying to complete my retros and have to have my bumper powdered and a few custom touches and yes. All the headlight brackets must be used to support the headlights with the 12-15 pelfrey

 

For those of you who bought the eBay hoods would you do it again? It seems like it's going to be damaged in transit

 

Mine came fedex freight, not a scratch, however YMMV