What Have You Done To Your 2nd Gen Tacoma Today?

Since this thread is full of a lot of knowledgeable people, I appreciate any help with ideas!

https://www.tacomaworld.com/threads/christmas-list-ideas.455106/

 

That looks like a solid unit, I think you'll be good in the rain. Mine doesn't have the Velcro & it's pretty much water tight - nicely done!

 

Here's a link if anyone is interested in my bumper build.

https://www.tacomaworld.com/threads/2nd-gen-bumper-build.391397/

 

Third Gen do need tow hooks
Like the 2nd Gen arent bad enufff!!

 

Yuuuuuuuuuuuup

 

Looks sweet

 

Thanks man I built if from scratch. All in all I think I spent around $3xx dollars

 

I see the passion in it. Keep it up

 

@nazlax10 There's not much to write up really. The lights I'm using are vanity lights from an older BMW like these:
https://www.ebay.com/itm/232089641084
The project boxes I used are these:

$8 Hammond 1591ASBK ABS Project Box Black

https://www.amazon.com/dp/B0002BBQNM
And for the bulbs you can use Philips Vision LED 6411 Festoons or these Sylvania ones:

$10 SYLVANIA - 6411 41mm Festoon LED White Mini Bulb - Bright White LED - Ideal for Interior Lighting - Map, Trunk, Cargo & License Plate (Contains 1 Bulb)

https://www.amazon.com/dp/B01A77UFDC

The rest will just be some red and black 16 gauge wires and tapping into the dome light circuit at the fuse box. I'll use something from Home Depot to make some brackets for mounting. I'm going about this the long way just to allow me to use standard bulb sizes versus some proprietary stuff like the set that Toyota sells.

 

Thank you for all the links. That helps out a lot!

 

Today I used a thigh-high rock waterfall to do some custom exhaust routing & quarter panel forming. Came out *exactly* like I wanted

 

Nice!!!!!




Chop that sucker!!!

 

Installed led map, dome and reverse lights

 

Little cleaning

 

Ordered Headstrong Offroad's 3 leaf progressive AAL about a week ago. I had the leaf springs replaced under the recall and my rear end has been sagging compared to the front end with the spacer still in. I just got an email from Marie, and she said they were shipping soon. I'm beyond excited to get the truck leveled out again. But above all, that lady is working at 8pm her time! That's crazy. Headstrong Offroad truly has the best customer service I have ever dealt with.

 

Agreed

 

It bolts directly on to the engine undercover

 

No it doesn't cover the drain.

 

Truck is being used to make templates at my buddy's shop here in Vegas. Just one of the things they are doing.

 

This is being pulled off today I think then something else is going on