What Have You Done To Your 3rd Gen Today?

http://ddmtuning.com/Products/UltraHIDKit Is what I bought, I also ordered a relay harness but never installed it. No need for canbus in our trucks either

 

Ok, I came up with a very simple, very cheap alternative to my problem. I wanted a compass on my mirror (check...standard) and homelink button (issue), somewhere other than my small visor. When I was driving to work the other day, I was looking around for places that I could potential fix my std garage door opener or possibly a key chain fob. I then tried clipping it to my roof lining and found that it fit perfect and looked great. It looks muh better in person than what you see in the photo. Also, I am going to slide it up on the bracket, which will completely hide the metallic clip. Total install time: 5 seconds; total cost: 5 seconds of my precious time.

 

I have the same model garage door opener, and will be "installing this mod" as soon as I leave work.

 

Another great install from @rrentrop products. Highly recommended!

 

lol, You will likely need to remove the clip and squeeze it a bit to make it fit snug. That can be done within the 5 seconds...no tools necessary

 

Tested its limits. Lol ~1450lbs

 

Just did it , great idea!

 

Installed my bedrug today. Getting it ready to take to the drive-in theater. Now just need to install my bed speakers.

 

It came to me that by simply flipping the license plate mounting bars around 180 degrees make my custom aluminum front license plate mount into a high mount.

 

Washed and waxed made it pretty!!!

 

Always a good feeling going into winter with a clean ,waxed vehicle . It even makes me afraid to close the door for fear of finger prints . That came from my black 69 SS Camaro days but I digress ...............

 

Started with this....

Got this....

Did this....

 

Like a boss!

 

silver always looks great with a fresh coat of wax. By the way, what did you use. I would like to wax mine and am thinking the old jar of turtle wax does not belong on my truck.

 

Yup, I just gave my 2017 another wash and it's first good wax job the other day to get it ready for winter

 

Check out Blackfire Wet Diamond.

 

Hmm, I clipped mine to the visor for a couple months but took it off hoping it didn't leave permanent dents, but I've been keeping it in the square cupholder. Going to try this instead...

 

I took my garage door open, solder two wires to the circuit board then wired it to a black flush mount momentary button and mounted it to the upper console in between the map lights. You don't even notice it and it works great.

 

I previously blacked out my chrome bumper caps, so today I killed the chrome from the grill too. I'm going to look in to powder coating the wheels black next.

 

Also check out this thread: https://www.tacomaworld.com/threads/headliner-homelink-install.54783/

There are also a few folks who've retrofitted homelink mirrors onto their trucks if they didn't come with one.