What Have You Done To Your 2nd Gen Tacoma Today?

family reunion.

 

Is the plastic still in good shape?

 

I used nail polish remover to clean my excess bed armor that got on floor & dried up. Worked great. Idk if that would work???

 

That's the transmission gear selector cable.

 

Im gunna get a bigger tub and let it sit for a bit, below the chrome there is a coppery layer of metal, then below that is plastic, it so far has eaten down to the copper.

 

The stud that is still attached to the truck never had a nut on it, it is just to keep that bracket from rotating. The rust spot next to it is where the other stud broke off from. You should be able to put a nut on the stud still attached to hold it in place.

 

Well walmart doesnt sell a tub long enough

 

Wet Okole's installed,

 

Maybe try ACE hardware.

 

Possibly

 

Lowes or Home Dammit.

 

Maybe one of those childrens pools

 

Roof Rack Installed!



Thanks, Fern 11

 

I put some 275/70/16 on stock taco! Lift being delivered soon!

 

Unrelated note. Selling some tires & snow chains

 

The morimoto led fogs got delivered today and couldn't be happier with the way they turned out; they match the headlights perfectly. Install was cake - i referenced a previous write-up: https://www.tacomaworld.com/threads/morimoto-xb-led-fogs-12-14-install.333657/

I expect to have to line em' up a bit when it gets dark but I can't wait to see the output!

 

well in 3 or so hours it has just pitted really bad. Im annoyed.

 

Well that freakin blows. Time for a bare one from Toyota? When I did my grill I had to drive around without one for a few days.