Long Travel BS Thread

Lol.....

 

Good....get that good glass to people who want it fast.....

 

Big glass is badass........don't do it.....

 

F67 to e30/h70.

 

Did you have to move mounting points or will they direct fit into the f67 52.5" or whatever that was?

 

They're just about the same size. Fit right in the same spot. Didn't change a thing.

 

I'm thinking of putting the shifter backwards and making custom stickers for the PRN321. What do you guys think?

Because this stupid arm the cable bolts to has been giving me nothing but problems, so why not send it backwards out of the way!!

 

Do you have a bench seat? Why not just make the console longer so you have an armrest and room for cup holders/switches/hoon handle

 

No I have buckets but the console has to thin out to clear the gap between the two bucket seats. Length is not the issue, the width of the console is. And it can't get any wider where I want it to, and I don't want the shifter right in the middle of the console.

 

Move the shifter forward

 

It will get in the way of the ac controls

 

Move it lower..idk why you have it so high.

 

So then it can be bolted, the bolt holes are on the side of the shifter

 

If you're referring to the whole console. I like it higher up, I would just modified the stock shifter plate and kept the oe console if I wanted to keep everything close to the floor.

 

What about returning the shifter and getting the correct one?

 

How much were they? I'm looking to get the same ones once my truck is ready for suspension work. I live 1/2 hour from Deaver, but if there's a cheaper way to get them such as ordering from an out of state dealer w/ cheap shipping I'm interested to find out.

 

Anyone have the link for the better carrier bearing? I lost my bookmark for it

 

This ? Or the blue one ?
https://www.tacomaworld.com/threads...uy-iedls-polyurethane-carrier-bearing.421410/

 

Curious about this too since I have to replace the one on my first gen extra cab.