Help with toytec aal should i put it on ?

Tw fellas need help decide on toytec aal should i put it on or naw my rig out front sits 1 inch higher them the back . If i ad the toytec aal would it go ass high? Sometimes i do loaded it up pretty good .
I run 5100 all around .
Any input would be great thanks guys .

 

Bump

 

A single AAL should lift the rear 1-1.5" so you might be a tad higher on the rear afterward but I doubt it would be very noticeable. If it is you could always raise the 5100s up a notch to compensate depending on how different it is.

 

your back end will be raised 1-1.5 inches, so you should be fine. If its higher, it wont be very noticeable.

 

With the overload or take it off ??

 

I would only take out the overload if you were using a 3 leaf AAL, with a single AAL I'd leave it in.

 

I would leave it in.

 

Great info guys . Easy to install? Aim pretty good with the tools istall my 5100 my self .

 

Yeah it's easy enough, if you can do your own front suspension then you can do the rear no problem. Not sure if you need longer u-bolts though...I did for my 3 leaf AAL.

 

Yup here ya go
https://www.tacomaworld.com/threads/aal-install-second-gen.54186/
It's the same no matter what gen your doing
Longer u bolts not needed.
I have the 5100's in and 2 aal's and don't need longer u bolts. New leaf pack center pins I needed though.

 

Perfect tnx guys . Aim running 265/75 coopers at3 now so that should be perfect high quality.