LCA Torque Spec?

Replaced the lower control arms and looked for a torque spec but couldn't find anything. Anyone happen to know? (torque spec for lca to chassis.)

 

This is all 2nd Gen Torque Specs not sure if it is the same for 1st Gen.

https://www.tacomaworld.com/threads/the-torque-spec-guide.318116/

 

96ft/lbs... I edited it. I was looking at the wrong column on my list.,,

 

Found this by using Google

https://www.tacomaworld.com/threads/st-gen-tacoma-torque-spec.439112/

Tier Rod Ends: 59 ft lb
Lower Ball Joint: 103 ft lb
Lower A-Arm: 96 ft lb
No 1 & No 2 Spring Bumpers: 17 ft lb
Upper Ball Joint: 80 ft lb
Upper A-Arm: 87 ft lb
ABS Sensor Clamp: 17 Inch lbs